windows xp won't boot after installing new ram

Brynn1 · Aug 5, 2014

Hell everyone
It is an old CPU ,I found that the ram was damaged/spoilt so bought a new ram DDR2 on Ebay
and then installed it but when booted it opens to BIOS and not to windows XP.
I don't know anything much about bios settings so I need help
(I'm 14 years old)
So I need Help

sgtmasterD · Aug 5, 2014

whel first of age dasent mater im also 14

but it coud be that te ram is not compatibul whit you motherboard try to chek it if you have a ather board whit ddr2 ram and atherwise try the look up the specs end look up ram whit the specs in mind next time chek what you need befor buying

Vic 40 · Aug 5, 2014

The o.s. still starts with the old ram?

Did you check the cable from the hdd to the motherboard? Maybe you touched that when installing the new ram or uninstalling the old.

pc god · Feb 24, 2015

hi there windows xp is an old sytem your problem doesnt lie with the ram it lies with the pc its a old chip and ddr 2 ram hope fully youve bought decentish ram you will need 2 things to fix your problem the flash uitlity for your bios and the updated bios for your pc once the bios has been flashed it should run whats happened here is youve bought some ddr2 which was made after the mb and chip therefore your bios was designed to handle say ddr 333 and youve bought ddr2 666 so the bios doesnt reconise the ram speed although it will alter it to its own bios setting of 333 say in example, it still wont run this is also because and new part has been put into the machine i assume its 32 bit windows xp which if it is wont run ram about 4gb will only use 3.5gb max unless you use a 64bit sytem the answer to your question is simple then flash your bios in stall xp 64bit and your rocking also check that nothing else has been disturbed in the installation like cable to hdds or anything else graphics slots all that stuff in there if you post on here you mb manufaturer number code i will try and find you the link for the bios flash that you need also it may be worth checking if the new sticks work soundly using memtest which will be in your bios happy computing

Search

windows xp won't boot after installing new ram

Brynn1

Reputable

sgtmasterD

Honorable

Vic 40

Titan

pc god

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page