Fractal R4 Fan Controlers

Toggle sidebar Toggle sidebar
N

Noitidart

Honorable
Apr 15, 2013
130
0
10,680
The fractal r4 case has some fan controling cables, i have no idea how to connect it, is it ok if i leave them disconnected? Also, my chasis fan is a 3 pin connector but the FM2A88X board has 4 pins on the connector for cha fan 1. I fit the 3 pin connector onto the 4 pin on the board is this ok?
 
Solution
fkr
yes and yes

when connecting a 3 pin as long as it still slides over the gui8de on the pins it is fine.

the forth pin is for active fan rpm control
Sort by date Sort by votes
fkr

fkr

Splendid
May 24, 2009
2,646
0
21,460
the fan controller can control 3 fans so you would just plug the fans into the controller. on the front of the case there is a button with the ability to change to three separate presets for fan speed. the motherboard will do just as well except oif they are 3 pin you be able to control there speed(the motherboard needs four pin connectors to control speed)

best of luck.

you can also instal a ssd behind the motherboard for a stealth ssd
 
Upvote 0 Downvote
fkr

fkr

Splendid
May 24, 2009
2,646
0
21,460
You connect the fan controller cables to your chassis fans cables directly. There are 3 fan controller cables for controlling up to 3 different fans,. You may have plugged your chassis fans into the motherboard, if so unplug them and mate them with your fan controller cables, connect a molex power connector from your power supply and you're done.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom