Alternatives to isopropyl

Toggle sidebar Toggle sidebar
S

ShadowSlayer

Honorable
Feb 10, 2013
75
0
10,630
Hi all i am getti g the h100i to install on my new rig ax temps are way too high. I obviously need to put new paste on, i have arcitci silver mx2. Now in uk i can not get any type of alcohol, all i have is nail vanish remover and surgical spirit. What is the best cheap alternative ti isopropyl? Should i just use a credit card to scrape it off? Really need some help here please guys as need to get it tomorrow. Also is the tim that comes with the h100i as good as mx2?or is it worth using the mx2? Never done tim manually any builds i did used pre applied paste. Thanks a lot all
 
Solution
coozie7
Like I said, surgical spirit is fine. It leaves NO residue, just let it dry for a minuet or so.
You can clean the stuff off dry, as bmacsys says, just pop the CPU out of its socket and give it a good wipe over, but be careful not to touch the gold contacts or you'll leave grease/oil/skin residue on them.
Sort by date Sort by votes
hunter315

hunter315

Champion
May 12, 2009
10,653
3
51,960
Isopropyl isn't drinking alcohol, you get it in the drug store, it is generally labeled as rubbing alcohol, surgical spirit may be the same thing it would say xx% Isopropyl alcohol somewhere on the bottle. Generally you want it to be as high as possible, 70% is the most common as it works best for cleaning wounds but you really want ~95-99% when using it as a solvent.

Nail polish remover might work, but generally people pick alcohol over acetone as it is less aggressive so nail polish remover isn't commonly tested.
 
Upvote 0 Downvote
P

Pinhedd

Champion
Aug 7, 2007
10,342
20
56,965


Any of the following will work:

laboratory ethanol / denatured alcohol

rubbing alcohol / isopropy alcohol

electronic contact cleaner / tuner cleaner (some of these also lubricate. These particular ones are great for cleaning gold plated circuit connectors but are not ideal for cleaning off thermal paste)

nail polish remover / Acetone (I haven't tested this myself, but it should work given the similarities to ethanol)

lighter fluid (be extremely careful)
 
Upvote 0 Downvote
coozie7

coozie7

Champion
Jun 2, 2007
10,015
10
59,215
I think surgical spirit is much the same as rubbing alcohol, either way I've been using surgical spirit as a cleaner for years, ( UK resident as well ).
Don't use nail varnish remover or other strong solvents, the COULD damage motherboard components.
Remember, Arctic Silver is electrically conductive so clean from outside in to prevent any spilling onto the CPU/MB.
 
Upvote 0 Downvote
S

ShadowSlayer

Honorable
Feb 10, 2013
75
0
10,630
Thanks all. Been to four shops today including 3 chemists/pharmacys sbf all of them lookrd at me like i was an idiot when i asked for it. I have surgical spirit a nd nail polish remover. Will just usibg a card and cotton wool to scrape it be enough? I read somewhere surgical spirit can leave residue? Also note this paste has only been on for about a week so it hasnt had long to dry out. Thanks a lot for the help all!
Sorry for spelling erros, my tablet is blnot essy to type on haha!
 
Upvote 0 Downvote
B

bmacsys

Honorable
BANNED
Jul 4, 2013
1,854
9
12,165


Unless the tim is hardened which is extremely doubtful a dry napkin will suffice. There is no need for alcohol.
 
Upvote 0 Downvote
coozie7

coozie7

Champion
Jun 2, 2007
10,015
10
59,215
Like I said, surgical spirit is fine. It leaves NO residue, just let it dry for a minuet or so.
You can clean the stuff off dry, as bmacsys says, just pop the CPU out of its socket and give it a good wipe over, but be careful not to touch the gold contacts or you'll leave grease/oil/skin residue on them.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom