Sign in with
Sign up | Sign in
Your question

is my motherboard dead

Tags:
  • Cases
  • Computers
  • Motherboards
  • Graphics
Last response: in Graphics & Displays
Share
August 9, 2014 9:16:18 AM

Hi all,
Today i brought a new case for my system, but after changing my computer case i found out that my computer is not running anymore, whenever i start the computer, the fans spins for few second and then stops and it continues indefinitely. i have tried all the measures i can think of like booting my only my motherboard without ram and gpu and it did not produce any beep sound, also i have tried with another power supply but that didn't work either.
So please help me rectify the problem.

More about : motherboard dead

a b V Motherboard
August 9, 2014 9:27:09 AM

check all power cables .make sure your connect them all and motherboard not touching case ground.it can be anything sometimes just vacuuming touching power cables your can loose connections.
m
0
l
a c 1185 V Motherboard
August 9, 2014 9:27:15 AM

Both main and CPU power connectors connected?
m
0
l
Related resources
August 9, 2014 10:05:28 AM

yup, i have checked all the power connections, but still problem persist.
m
0
l
a b V Motherboard
August 9, 2014 10:14:39 AM

make shore your install cpu correctly and the memory sit properly.
m
0
l
August 9, 2014 10:19:50 AM

kapitalistas said:
make shore your install cpu correctly and the memory sit properly.


i did, as i said i even booted only my mother board without gpu and ram stick and it did not produce any beep sound which it should have.
m
0
l
a c 1185 V Motherboard
August 9, 2014 10:25:57 AM

If a motherboard/case speaker was present it should unless there is a short somewhere that will stop the PSU before beep, try booting with the board on none conductive surface out side the case.
m
0
l
August 9, 2014 10:29:35 AM

rolli59 said:
If a motherboard/case speaker was present it should unless there is a short somewhere that will stop the PSU before beep, try booting with the board on none conductive surface out side the case.


ok thanks, i will try that and let you know if it works.
m
0
l
!