Sign in with
Sign up | Sign in
Your question

R9 290 Vram/VRM Heatsinks

Tags:
  • NZXT
  • Cooling
  • Heatsinks
  • CPUs
Last response: in CPUs
Share
August 9, 2014 1:06:04 PM

SO i have bought a nzxt kraken g10 and am still deciding on a cooler (under 55 pounds)
i am picking up the gelid enhancement kit however i need heat sinks for all the other chips on the PCB

does anyone know of any that work with the 290 also what thermal pads should i buy

R9 290 PCB LAYOUT http://www.hardwareheaven.com/reviewimages/amd-radeon-r...

also does anyone know the size the vram chips are ?
thanks

More about : 290 vram vrm heatsinks

August 9, 2014 1:27:51 PM

damric said:
These are what I use on VRAM.

http://www.frozencpu.com/products/7191/vid-106/Enzotech...

If you have a problem with the included thermal tape sticking, then use the AS thermal adhesive that you mix.


are these a perfect fit ?
also could u remove the VRMS off the stock cooler and use them ?
m
0
l
Related resources
a c 121 à CPUs
August 9, 2014 1:36:47 PM

Zaman786Ahmad said:
damric said:
These are what I use on VRAM.

http://www.frozencpu.com/products/7191/vid-106/Enzotech...

If you have a problem with the included thermal tape sticking, then use the AS thermal adhesive that you mix.


are these a perfect fit ?
also could u remove the VRMS off the stock cooler and use them ?


Yes all GDDR5 is same size. Just make sure they have enough clearance for the rest of your cooling setup.

What exactly is your intention with the VRM sink?
m
0
l
August 9, 2014 1:43:07 PM

damric said:
Zaman786Ahmad said:
damric said:
These are what I use on VRAM.

http://www.frozencpu.com/products/7191/vid-106/Enzotech...

If you have a problem with the included thermal tape sticking, then use the AS thermal adhesive that you mix.


are these a perfect fit ?
also could u remove the VRMS off the stock cooler and use them ?


Yes all GDDR5 is same size. Just make sure they have enough clearance for the rest of your cooling setup.

What exactly is your intention with the VRM sink?


TOO cool it as the NZXT kraken g10 leaves all the chips with no heatsink
so can i just pull the ones off my stock cooler ? and use that
also what size is GDDR5 ?

thans
m
0
l
!