Using GA-LMT-USB3 with AMD FX-4130 no video
- Thread starter nomad3967
- Start date
Goodeggray
Distinguished
- Sep 10, 2011
- 1,467
- 1
- 19,660
Look in the mobo manual to clarify where the ram should go.
Go thru Tom's checklist - http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems CAREFULLY.
Your choice if components leaves a lot to be desired - crappy cpu, crappy mobo and crappy ram. What else?
Post your complete and detailed build.
Go thru Tom's checklist - http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems CAREFULLY.
Your choice if components leaves a lot to be desired - crappy cpu, crappy mobo and crappy ram. What else?
Post your complete and detailed build.
Try the ram sticks individually, one could be bad. Also the board doesn't always recognize which graphics to display. So if you have a video card installed you have to use the on-board video first and boot twice. And keep hitting the delete key to get into bios and change settings.
And on top of this, if you board is the 5.0 rev black/grey version it has the latest and only bios already installed.
And on top of this, if you board is the 5.0 rev black/grey version it has the latest and only bios already installed.
TRENDING THREADS
-
-
Question how to remove toolkit.telemetry.cachedClientID on FireFox
- Started by 131rg45w412
- Replies: 10
-
Facebook
Twitter
Instagram