I plan on using multiple radiators and a large reservoir. I'm just afraid that I'm not going to have a strong enough pump. I've heard good things about the D5. I just don't know how strong it's rated at.
The radiators and reservoir don't matter as much as the number of blocks (and how they are configured), that's what matters.
Give a flow order and from there I can give you advice.
The radiators and reservoir don't matter as much as the number of blocks (and how they are configured), that's what matters.
Give a flow order and from there I can give you advice.
I plan to at least cool my CPU, GPU and MAYBE motherboard. I honestly don't know what my order will be. Whatever looks cosmetically the best I assume. Does each part need to have its own radiator?
A CPU and GPU block would be fine for a D5. Including the mobo block is more than likely fine.
You need enough radiator to cool all three components combined worst case scenario heat output, without knowing the CPU/GPU and assuming the mobo is in as well, I would say 2x360mm thin rads or equivalent.