Hey all just bought my new benq ew2440L monitor and just set it up next to my benq RL and the quality of it is horrible, its hard to read text and everything is just blurred. even the wallpaper looks a lot worse. I had trouble installing the driver as well it wouldn't let me install as there is nothing to click on, anyone know anything about this?
New Benq EW2440L monitor is all blurry
- Thread starter Malko8
- Start date
smeezekitty
Distinguished
- Sep 11, 2012
- 6,960
- 0
- 18,460
smeezekitty
Distinguished
- Sep 11, 2012
- 6,960
- 0
- 18,460
So using VGA is almost certainly the problem.
HDMI is the next best option then. You probably have an underscan issue (common with HDMI - one of the many reasons I recommend against it when possible)
Your GPU's control panel should have options to change the under/over scan to get rid of those bars
I might be able to come up with more specific instructions if I know your GPU brand (Intel, AMD, NVidia)
HDMI is the next best option then. You probably have an underscan issue (common with HDMI - one of the many reasons I recommend against it when possible)
Your GPU's control panel should have options to change the under/over scan to get rid of those bars
I might be able to come up with more specific instructions if I know your GPU brand (Intel, AMD, NVidia)
smeezekitty
Distinguished
- Sep 11, 2012
- 6,960
- 0
- 18,460
Here is how to adjust underscan:
Open CCC
Go to the "My Digital Flat-Panels" tab
Click "Scaling options"
Drag the underscan bar to see if it helps
Open CCC
Go to the "My Digital Flat-Panels" tab
Click "Scaling options"
Drag the underscan bar to see if it helps
smeezekitty
Distinguished
- Sep 11, 2012
- 6,960
- 0
- 18,460
I just looked at your monitor spec page and it looks like it doesn't have a native DVI-D (!) port. I was going to suggest trying to
swapping the cable out with your main monitor but you could only do that with a DVI to HDMI converter.
At this point it is probably a monitor problem and you should look at returning it
swapping the cable out with your main monitor but you could only do that with a DVI to HDMI converter.
At this point it is probably a monitor problem and you should look at returning it
Ok so i just tried resetting the colour setting on the monitor and it made it a lot better but now there is like a shadow behind the text which makes it hard to read.
It still makes everything look a little blurry. i'm just so used to my other perfect monitor
It still makes everything look a little blurry. i'm just so used to my other perfect monitor
TRENDING THREADS
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 5
-
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 19
-
-
Facebook
Twitter
Instagram