Sign in with
Sign up | Sign in
Your question
Solved

P5G41T-MLx not booting up with new HyperX Fury ram

Tags:
  • RAM
  • Computers
  • Memory
Last response: in Memory
Share
August 12, 2014 7:50:25 AM

I bought 2x4gb HyperX Fury 1866mhz ram recently and my computer just won't display anything after installing it. The fans run just fine but nothing shows up.

I currently put back my older ram which is a Corsair Value Select 1333mhz 4gb ram.

What I had done:
1. Reset CMOS
2. Tried to set the latency to cl7 and cl8 using the old ram and swap in only one of the new ram (cl9 and cl10 doesnt boot for the old ram)
3. Set the ram speed to 1066mhz
4. Tried OC the my Q6600 to 333mhz FSB to get 1333 dram freq. Boots with old ram not with new.

System specs:
P5G41t-MLX
Q6600 2.4ghz FSB266 x9
500W cheapo power supply
R7 250x

Any more suggestion?

More about : p5g41t mlx booting hyperx fury ram

Best solution

a c 2285 } Memory
August 12, 2014 6:43:36 PM

Believe these are made with high density memory chips that aren't compatible with the chipset of your mobo, might want to contact KingstonHQ via PM here on the forums, they can confirm
Share
August 12, 2014 7:46:32 PM

Tradesman1 said:
Believe these are made with high density memory chips that aren't compatible with the chipset of your mobo, might want to contact KingstonHQ via PM here on the forums, they can confirm


I didn't knew that memory density is a thing. Tried google it and not much came out. Even Kingston's and Asus website didn't say a thing about that.

Is there a lga775 mobo that can support these high density ram?
I may can get it for around $30

m
0
l
a c 2285 } Memory
August 12, 2014 10:07:45 PM

The older lower density memory chips are hard to come by these days. You could prob shop around and find some the Ripjaws line (regular Ripjaws not the X or Z lines should work,
m
0
l
!