ASROCK P67 Fatality +new GPU (R9 290) dr debug 97 error

witerzet · Aug 14, 2014

Hello everyone,
for the beginning my specs:
CPU: i5 2500K
MB: ASROCK P67 Fatality
GPU: GTX 560Ti
PSU: Corsair TX 750W

I just put new GPU (R9 290) to my PC and It doesnt boot. I have Dr debug error number 97. Ive tried to find answer in the internet for like past 3 hours but didnt find any solution.
What I did:
Plug off baterry
Reset CMOS
Plug off PSU
Tried to switch power buttow w/o battery and PSU plugged in to clear capacitors.
Test GPU (R9 290) on another PC (and it works fine)

All of above didnt work for me so I had to use my previous GPU.

Do you have any idea whats going on or how can I fix it ?
Thanks in advance and have a nice day !

rdizz81 · Aug 14, 2014

Try moving your video card to another slot and reboot. Also make sure the card is plugged in to the PSU.

debug code 97 is:

Problem related to PCI-E devices. Please re-install PCI-E devices or try installing them in other slots. If the problem still exists, please remove all PCI-E devices or try using another VGA card.

This is from the manual on your motherboard.

So my thought is either you have a bad board or bad video card. Leaning to board because you said you tested in another machine. There is also a slight chance of not enough power going to card from your PSU. Should be enough that is a good PSU but it could be bad?... just some other thoughts.

Embra · Aug 14, 2014

Have you flashed the Bios? If not, try (1.80 B BIOS)

witerzet · Aug 14, 2014

I tried to put it in another slot but didnt flash BIOS so I will definitely do it today

witerzet · Aug 16, 2014

I tried new BIOS and it didnt change anything. Still error 97.

witerzet · Aug 17, 2014

Do you have any updates/ideas/solutions? Do you think GTX770 will run fine if I buy it ?

Embra · Aug 17, 2014

Make sure the bios installed correctly, check at boot. Try resetting the cmos.

witerzet · Aug 29, 2014

I bought GTX770 yesterday and it runs perfectly. I had AMD GPU once and Im quite sure I will never buy it again. And one more thing: I have 2 monitors (one is HDMI and second one VGA which is running on DVI cable due to lack of VGA on GPUs for a looong time) and I wasnt able to use VGA one - even on DVI cable on AMD GPU because it had different DVI output. Of course it runs smooth and w/o problems on NVIDIA card so... if you are reading it - you know what to do.

Search

ASROCK P67 Fatality +new GPU (R9 290) dr debug 97 error

witerzet

Honorable

rdizz81

Distinguished

Embra

Distinguished

witerzet

Honorable

witerzet

Honorable

witerzet

Honorable

Embra

Distinguished

witerzet

Honorable

TRENDING THREADS

Latest posts

Moderators online

Share this page