Windows 7 random lock-ups

mrpuppt · Aug 14, 2014

Hello! I'm running an AMD 64 X2 6000+ on an MCP6P M2+ Mobo with 1 1/2 gigs of ram, and an GeForce 8500 1gig video card. I've got an 800 watt power supply too.

They system has been running fine, but my HD started giving me errors so I replaced it with a brand new 1 terabyte Seagate SATA model.

I loaded Windows 7 Home Ultimate and updated it just fine. However, now it randomly locks up and cntrl-alt-delete won't break it. I have to shut the pc off, and it runs chkdsk and finds errors and such fixes them. When it restarts it will hang on the windows logo screen forever.

I decided to do a total hd wipe and re-install Windows again. It loads from the disc, starts the process... gets to the Windows logo and hangs on it forever. So I can't even get a fresh copy of Windows on it.

Any idea what could be going on? I'm in the middle of researching, but so far no one seems to have my specific problem. Thanks for any advice you can give.

ikaz · Aug 14, 2014

Have you tried to connect the Hard drive to a different Sata port and maybe try a different Sata cable ?.

mrpuppt · Aug 14, 2014

ikaz :

No I haven't.... we'll give that a go and see what happens. This is the first time I've dealt with a problem like this. Thanks!

ikaz · Aug 14, 2014

I had a problem with once with installing windows 7 and and it turned out to be the sata port on the MB was bad worth a shot and easy to try.

ikaz · Aug 14, 2014

oh another thing you can try is to remove all but one stick of memory as that could also be the issue. It would be a good idea to run memtest if your able to get windows installed.

mrpuppt · Aug 14, 2014

I forgot to mention this in my original post - I ram memtest for like 7-8 passes and it came back with no errors. I also did a hd diagnostic and it came back ok. I switched the port and cable... it runs sluggish as before. It will take forever to do a task. Before, it has locked up during said task but it hasn't done that... *yet*.

mrpuppt · Aug 14, 2014

With the memory and HD checking out ok... could this be a power supply problem? I have Kentek 850 that was bought over Xmas and until these problems it's not given me any cause to look at it. I've also had the mobo since 2008... could that be playing out? I'm at a loss for what could be causing these problems...

ikaz · Aug 18, 2014

Also if your able to boot into windows run a chkdsk on the C drive to try to find software errors. There *could* be an issue with the PS if you have an older one you should use to rule it out that would be good.

mrpuppt · Aug 25, 2014

UPDATE - I replaced the mobo, memory, and processor (a slight upgrade to the cpu and ram). So, the only things that weren't replaced were the GeForce 8500GT vid card, the above power supply, and the CD/DVD drive. I also bought the mobo, memory, and processor all together, already assembled so I know they would be done right and compatible.

However, when I try to load Windows and I press the "Install Now" button, it gets hung and sits there. As there is a version of Windows already on the HD, I try to load into it and it gets hung at the Windows logo screen and just sits there. What else is left to try? :na:

I'm thinking the PS is the culprit... that's the last thing that it could be that wasn't replaced right?

Search

Windows 7 random lock-ups

mrpuppt

Distinguished

ikaz

Distinguished

mrpuppt

Distinguished

ikaz

Distinguished

ikaz

Distinguished

mrpuppt

Distinguished

mrpuppt

Distinguished

ikaz

Distinguished

mrpuppt

Distinguished

TRENDING THREADS

Latest posts

Moderators online

Share this page