H110 vs Stock Cooler, Pre-OCing Performance?

Mar 28, 2014
65
0
4,630
Hi there, I've been planning a build for a while.
And I've been considering getting a Corsair H110 Watercooling System to cool an i5 4690K Processor in a Corsair 750D case.

I'm going to be reusing an old ASUS GTX 660 Direct CU II OC Edition 2GB GDDR5 for the Graphics Card.

But I am curious.
I've chosen Watercooling because of a multitude of reasons:
- I don't want to have to attach a massive block of heat-conductive metal to the Motherboard. I fear the weight and the effect of gravity will eventually catch up to me and it'll either fall out or crush the CPU.
- I want to have full access to the RAM slots, and many of the quality Air Cooling units in fact are so large that they block the RAM sockets.
- I wish to overclock at a later date and water-cooling seems to be generally better for this.
- I don't want to deal with dust collecting in the heat sink directly on top of the CPU, cause clearing it out is a pain in the ass and would prefer cleaning just the easily accessed radiator.

However I want to know how much more effective Watercooling is than the Stock Cooler.

How much cooler will it keep the CPU before I start overclocking the processor than the Stock Cooler would pre-OCing the CPU?
 

FoxVoxDK

Distinguished
Let me put it this way.

Without OC, the stock cooler during heavy workloads would probably be around 60-90c(you never told me which CPU so I am giving the temp ranges for a 4690k, 4790, 4820k, 4930k on stock coolers that I have seen myself) with the Corsair H110 it would be somewhere between 45-60c.

If you OC with a stock cooler you will see temperatures in the 100c range with thermal throttling, with an H110 you'd probably see around 65-70c
 
Mar 28, 2014
65
0
4,630


Well I said it on the second line. "i5 4690K".

Well that's supremely better than the stock cooler, holy crap. It'd be kinda useful during Summer then. Cause I live in Queensland, Australia, and it can get pretty hot here.

Also if I was to replace the fans or add more fans, are there any specific models you'd recommend? Or what statistics to look for?
 

FoxVoxDK

Distinguished


Yea, my bad, I just rolled out of bed. xD it's 5:37 a.m.


Look for static pressure fans for Radiator and intake fans, maximum airflow for exhaust.

The Corsair H110 comes with great fans but you may be able to cut off some noise with some
Noctua NF-A14 PWM though.
 
Mar 28, 2014
65
0
4,630


And that'd increase cooling performance even further? Me Gusta.