Sign in with
Sign up | Sign in
Your question

h100i corsair link not able to fully change fan speeds

Tags:
  • Corsair
  • Cooling
  • Fan
  • Components
  • Fan Speed
  • Fan Controller
Last response: in Components
Share
August 18, 2014 2:40:02 PM

So I finally got my H100I working with link thanks to amazons return policy :D . I have 4 fans set up to the h100i block, I try to make them all run silent as possible (making a ultra quiet profile) but 2 of the fans simply wont go under 1200rpm, while the others will happily go to 500. I have the 2 standard fans on the rad and then 2 sp120's in my case, here is my setup:



Any idea why? And what I can do to fix?
note: I have 1 rad fan and 1 sp120 per Y cable from the block.

More about : h100i corsair link fully change fan speeds

August 18, 2014 2:49:56 PM

Are they all the same fans?
m
0
l
August 18, 2014 3:46:45 PM

No, the 2 default corsair ones that come with the H100I, and 2 SP120's.
m
0
l
Related resources
August 18, 2014 4:16:18 PM

Have you updated the firmware on the H100i unit? I had a lot of troubles with mine until I updated my firmware.
m
0
l
August 18, 2014 4:18:14 PM

ive seen lower limits with fans, sometimes its an issue hardwired into the fan itself.
m
0
l
August 19, 2014 11:00:06 AM

I have not updated the firmware as I needed to return my previous one because when I did update the firmware it bricked it. Also is it normal for core #0 to be ~2-6 degree higher than the lowest core at times ? (foir a few secs then back down to maybe 2 degrees higher max)?
m
0
l
August 19, 2014 4:03:54 PM

Yeah that is normal. Some cores just run hotter than others. As the panda man said it could also be the fans. Not all fans are designed to spin down to 0 RPM.
m
0
l
!