I recently added an h105 and replaced my PSU with a Corsair VS450, but now when I turn it on the fans, LEDs and CPU pump and fans start, but no output and no beep codes
I suspected it was something related to the CPU, as that's all thats been touched, so I unplugged the CPU 4 pin power and turned it on. It did the exact same thing but with a slightly different hum...
I plugged CPU power back in and removed the memory, then turned it on, no beep codes
I tried to clear the CMOS with a jumper, but no difference
If there are no beeps from the mobo ever, does that mean the fault is with the mobo? not sure where to go from here.
I suspected it was something related to the CPU, as that's all thats been touched, so I unplugged the CPU 4 pin power and turned it on. It did the exact same thing but with a slightly different hum...
I plugged CPU power back in and removed the memory, then turned it on, no beep codes
I tried to clear the CMOS with a jumper, but no difference
If there are no beeps from the mobo ever, does that mean the fault is with the mobo? not sure where to go from here.