Sign in with
Sign up | Sign in
Your question

r9 290 reference with arctic accelero hybrid ii cooler temps

Tags:
  • Cooling
  • Arctic
  • Graphics
Last response: in Graphics & Displays
Share
August 21, 2014 5:33:15 AM

Just wondering if anyone has fitted an arctic accelerro hybrid ii to an r9 290 and what temperatures are you getting? I've fitted the hybrid ii to my reference 290 ocd to 1000 mhz and it hovers around 59 at full load when gaming (bf4, far cry3), just wondering how this compares to everyone else?

More about : 290 reference arctic accelero hybrid cooler temps

August 21, 2014 5:39:40 AM

That setup is rather rare, so I'd just throw my opinion about the temps.
Those temps are absolutely fine, the GPU is not adviced to get over 80C on full load, and your temps are WAYYY under that limit!
My Tri X R9 290 gets to mid 60s under heavy load, so your setup is rather better (room temps may differ). You're good to go :) 
m
1
l
August 21, 2014 5:54:11 AM

The reference cards run at 94 C at full load so it's a definite improvement! Just want to see if anyone else has this setup and if the temps are similar :) 
m
0
l
Related resources
August 21, 2014 6:10:13 AM

I also have the Tri-X which gets to 63-65 at full load. Your temps look very good.
m
0
l
October 13, 2014 11:57:23 PM

Eddie0711 said:
The reference cards run at 94 C at full load so it's a definite improvement! Just want to see if anyone else has this setup and if the temps are similar :) 


I just got a 290 reference card given too me. It's super loud and hot and my wife hates it as she is trying to watch TV next to it.
I am going to buy the hybrid 120 just wanted to know how loud this cooler is?
m
0
l
October 14, 2014 3:05:30 AM

It's virtually silent next to the reference cooler plus it keeps the temps down by about 30 degrees!
m
0
l
October 14, 2014 5:45:35 AM

Oh nice well I ordered it tonight so cant wait to fit it!!!!
My wife shall be happy too :)  less noise
And can get more out of my card with over clocking :) 
Will post with my temps once fitted and running
m
0
l
less than a minute ago

Just fitted the hybrid and after stuffing up my vram1 heat pads and pulling it all apart to fix it, the temps are 72c gpu 90c vram1 60c vram2 after 25min of furmark burn in.
That is silent mode and fans flat out the gpu sits at 62c after 25min of furmark
m
0
l
!