Will these fans work with my case and fan controller?

DrewJKL

Reputable
Aug 20, 2014
64
0
4,630
Here is my case: http://pcpartpicker.com/part/corsair-case-750d

Here is my fans: http://pcpartpicker.com/part/corsair-case-fan-co9050009ww

Here is my fan controller: http://pcpartpicker.com/part/nzxt-fan-controller-senmix2

In that case it says you can mount two on top, can you? Which way would you mount them pull air into the case or push air out like an exhaust? Would it look bad in my case? Just some general question about fans/fan controllers.

Here is my build so far: http://pcpartpicker.com/p/V3W88d
 
Solution
Yes, the fans, case, and controller are all compatible. If you're going to add fans to the top, I'd recommend you set them up as exhaust (typically- bottom, front, side = intake; rear and top = exhaust). You might want to try the case with just the stock fans first and see how they work for your temps. You can always add fans in later if you're not seeing the temps you want.
Yes, the fans, case, and controller are all compatible. If you're going to add fans to the top, I'd recommend you set them up as exhaust (typically- bottom, front, side = intake; rear and top = exhaust). You might want to try the case with just the stock fans first and see how they work for your temps. You can always add fans in later if you're not seeing the temps you want.
 
Solution

DrewJKL

Reputable
Aug 20, 2014
64
0
4,630



Alright thanks for all your help