6 Pin PCI-E to Molex

Toggle sidebar Toggle sidebar
M

Mr_Boberto

Reputable
Jul 21, 2014
7
0
4,510
I removed a pin from my 6 pin pci-e to molex 4pin molex connector in order to sleeve it and iv completely forgot which slot it goes back in to. There was only 4 pins in the 6pin connector so i know 2 slots will be empty. Slots 1,4,and 5 are filled. Where does the last one go back into?
 
Solution
volcanoscout
You'll want to look up your specific PSU for the pinout, as there are differences from brand to brand and model to model. I've got a Corsair AX860 and my pinout for the same cable is 1-12V, 2-5V, 3-open, 4-common, 5-open, 6-common. If you only removed one pin, then it's obviously a different pinout.
Sort by date Sort by votes
volcanoscout

volcanoscout

Dignified
Jan 5, 2014
2,861
3
14,960
You'll want to look up your specific PSU for the pinout, as there are differences from brand to brand and model to model. I've got a Corsair AX860 and my pinout for the same cable is 1-12V, 2-5V, 3-open, 4-common, 5-open, 6-common. If you only removed one pin, then it's obviously a different pinout.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom