Do I need to erase SSD before reinstalling Windows?

Toggle sidebar Toggle sidebar
R

Reikan Amin

Honorable
Jun 1, 2013
48
0
10,530
I'm running into a lot of problems with my current version so I'm looking to do a fresh re-installation while taking advantage of the 840 evo drive encryption. Should I just simply reinstall like I would a HDD or is there a process involved?

Also an additional question- Is there any point in encrypting my SSD when I am also using an HDD?
 
Solution
Danra
Enter BIOS, make your optical drive the boot drive. Place the Windows disk into your optical drive and start the computer [soft boot from BIOS will work]. At the early phase of installing Windows, remove all partitions, then add them as required. This will erase everything Windows can see and it will "think" you are installing to a new drive.

Remember to re-enter BIOS and make your SSD the boot drive after installing Windows.
Sort by date Sort by votes
geofelt

geofelt

Titan
Oct 9, 2006
54,333
4,162
174,240
I can't speak to encryption.
But, it seems to me to be asking for trouble. A lost key would be a problem.
If you have files that would be valuable to others if stolen, then perhaps.

For a fresh install, you will be asked if you want to overwrite the current data so no added erasure is necessary.
 
Upvote 0 Downvote
J

jdcranke07

Honorable
Feb 10, 2014
1,346
2
11,965
The encryption would be drive dependent. So, if you HDD can utilize it then you can use it there, however, if not then don't worry about the HDD.

My personal recommendation is to use a wipe program like Parted Magic that cleans the SSD completely. If you just re-install windows without wiping all the original stuff is still there, but it is put into another subfolder.
 
Upvote 0 Downvote
B

bigpinkdragon286

Splendid
Oct 3, 2012
4,648
35
28,590
I would recommend against a secure erase feature unless your drive holds sensitive personal data that could fall into the hands of somebody who will use it for nefarious purposes. It causes unnecessary wear and tear on a device with limited write capacity. All you need to do is delete the partitions on your SSD during the Windows installation process, which will effectively remove all of the data, and let Windows partition the drive for you. It won't have any leftovers or remnants of your data to worry about, and you'll be doing the least amount of writing to the drive, therefore extending it's useful lifespan.

I would also steer clear of any drive encryption, unless you know that you need it. In the event your drive is no longer accessible through the computer it is installed into, you may find you are unable to retrieve your data through other methods as well. These features are for those who have sensitive data, or are trying to hide something. It doesn't keep you any safer from malware or viruses.
 
Upvote 0 Downvote
Danra

Danra

Distinguished
May 25, 2005
581
36
19,640
Enter BIOS, make your optical drive the boot drive. Place the Windows disk into your optical drive and start the computer [soft boot from BIOS will work]. At the early phase of installing Windows, remove all partitions, then add them as required. This will erase everything Windows can see and it will "think" you are installing to a new drive.

Remember to re-enter BIOS and make your SSD the boot drive after installing Windows.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom