Need help really fast about overclocking
Tags:
-
Overclocking
- Overclocking AMD FX 4130
- AMD FX 4130
Last response: in Overclocking
MrAlanSmith
August 23, 2014 9:30:50 PM
I have overclocked my AMD FX 4130 to 4.02 Ghz ..
I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
I tried to overclock to 4.5ghz but when i restart my pc wont restart, I have to turn of PC to get it working again.
My temps right now is CPU Temp is 39C MB Temp is 36C
I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
I tried to overclock to 4.5ghz but when i restart my pc wont restart, I have to turn of PC to get it working again.
My temps right now is CPU Temp is 39C MB Temp is 36C
More about : fast overclocking
-
Reply to MrAlanSmith
MrAlanSmith
August 23, 2014 9:35:04 PM
Related resources
- Really need some help about overclocking - Forum
- Need Help with what COULD BE A REALLY STUPID QUESTION about overclocking and CPU compatability - Forum
- I know you guys get this often but i need a really fast gaming laptop. My budget is about 700-75. 800 ONLY IF CRUCIAL. But i - Forum
- I need help very fast about BF4 Hase stoped working - Forum
- Eh, I really need help finding a good PSU fast! - Forum
It has to do with the front side bus, its set to auto and the motherboard does something slightly off of 200. set it to 200 manually (FSB) if you dont like it, thought it makes no difference and id leave it alone. its not 4.2, its 4.02, i dont see what you are talking about.
The overall clock speed is the FSB x the Multi = Ghz. So having the FSB set to anything other than 200 exactly will make it slightly off (of a round number, its not 'wrong' per se)
The overall clock speed is the FSB x the Multi = Ghz. So having the FSB set to anything other than 200 exactly will make it slightly off (of a round number, its not 'wrong' per se)
-
Reply to Beezy
m
0
l
MrAlanSmith
August 23, 2014 9:39:23 PM
Beezy said:
It has to do with the front side bus, its set to auto and the motherboard does something slightly off of 200. set it to 200 manually (FSB) if you dont like it, thought it makes no difference and id leave it alone. its not 4.2, its 4.02, i dont see what you are talking about. The overall clock speed is the FSB x the Multi = Ghz. So having the FSB set to anything other than 200 exactly will make it slightly off (of a round number, its not 'wrong' per se)
Im new to the forums, I dont know how to edit, I made a mistake, Everyone does?, No need to be rude, Im here for help.
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
-
Reply to Beezy
m
0
l
MrAlanSmith
August 23, 2014 9:45:54 PM
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
Ha, good luck with your problem. I already gave you the answer twice though.
-
Reply to Beezy
m
0
l
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
yeah go into your bios check the overclocking section see if thier is something called auto overclock or things that dont need to be on basically turn off everything except your overclock. To edit just click update this.
-
Reply to kunthakenthe
m
0
l
MrAlanSmith
August 23, 2014 10:07:53 PM
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
Ha, good luck with your problem. I already gave you the answer twice though.
I can not see front side bus in my Bios .... I have the Asrock N68-VS3 FX Motherboard.
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
Ha, good luck with your problem. I already gave you the answer twice though.
I can not see front side bus in my Bios .... I have the Asrock N68-VS3 FX Motherboard.
43 seconds into this video, i think the setting that says CPU frequency is the front side bus setting.
https://www.youtube.com/watch?v=I6Noj7p2yiQ
-
Reply to Beezy
m
0
l
MrAlanSmith
August 23, 2014 10:23:28 PM
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
Ha, good luck with your problem. I already gave you the answer twice though.
I can not see front side bus in my Bios .... I have the Asrock N68-VS3 FX Motherboard.
43 seconds into this video, i think the setting that says CPU frequency is the front side bus setting.
https://www.youtube.com/watch?v=I6Noj7p2yiQ
What should i set the CPU frequency Multiplier as?, You said 200?, I dont understand it doesnt have 200
OMG I see it, my bad, Going back into Bios
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith
August 23, 2014 10:29:45 PM
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
Ha, good luck with your problem. I already gave you the answer twice though.
I can not see front side bus in my Bios .... I have the Asrock N68-VS3 FX Motherboard.
43 seconds into this video, i think the setting that says CPU frequency is the front side bus setting.
https://www.youtube.com/watch?v=I6Noj7p2yiQ
It was set at 200 anyways, I put it at 175?, Ok?, i think if i go over 200 my pc wont boot.
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
Ha, good luck with your problem. I already gave you the answer twice though.
I can not see front side bus in my Bios .... I have the Asrock N68-VS3 FX Motherboard.
43 seconds into this video, i think the setting that says CPU frequency is the front side bus setting.
https://www.youtube.com/watch?v=I6Noj7p2yiQ
It was set at 200 anyways, I put it at 175?, Ok?, i think if i go over 200 my pc wont boot.
hm, if its at 200 even and the multiplier goes in interval of .5 (10x 10.5x 11x 11.5x so on so forth) it should come to an even number of Ghz. The only other thing i can think of is the windows power management settings in control panel, it can throttle the CPU and result is different weird clock rates. (Control panel/ Power options/ advanced power options/ processor power management)
-
Reply to Beezy
m
0
l
MrAlanSmith
August 23, 2014 10:38:30 PM
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
Ha, good luck with your problem. I already gave you the answer twice though.
I can not see front side bus in my Bios .... I have the Asrock N68-VS3 FX Motherboard.
43 seconds into this video, i think the setting that says CPU frequency is the front side bus setting.
https://www.youtube.com/watch?v=I6Noj7p2yiQ
It was set at 200 anyways, I put it at 175?, Ok?, i think if i go over 200 my pc wont boot.
hm, if its at 200 even and the multiplier goes in interval of .5 (10x 10.5x 11x 11.5x so on so forth) it should come to an even number of Ghz. The only other thing i can think of is the windows power management settings in control panel, it can throttle the CPU and result is different weird clock rates. (Control panel/ Power options/ advanced power options/ processor power management)
I need to go back into my Bios, I turned down the CPU frequency and my PC is only at 3.51 GHz xD lol
I was going back and furth into the bios and keeped going up on the CPU where you overclock to get more Ghz and it worked, At 4.02 Ghz it was very stable, My CPU Temp was at 39C, Is that good?, Ill stay here untill you reply, I cant go upto 4.5Ghz?, I dont really understand, Iv seen people go upto 4.5Ghz without any problems.
Yes it was with AMD FX 4130
Will it be my power supply?.
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
Ha, good luck with your problem. I already gave you the answer twice though.
I can not see front side bus in my Bios .... I have the Asrock N68-VS3 FX Motherboard.
43 seconds into this video, i think the setting that says CPU frequency is the front side bus setting.
https://www.youtube.com/watch?v=I6Noj7p2yiQ
It was set at 200 anyways, I put it at 175?, Ok?, i think if i go over 200 my pc wont boot.
hm, if its at 200 even and the multiplier goes in interval of .5 (10x 10.5x 11x 11.5x so on so forth) it should come to an even number of Ghz. The only other thing i can think of is the windows power management settings in control panel, it can throttle the CPU and result is different weird clock rates. (Control panel/ Power options/ advanced power options/ processor power management)
I need to go back into my Bios, I turned down the CPU frequency and my PC is only at 3.51 GHz xD lol
I was going back and furth into the bios and keeped going up on the CPU where you overclock to get more Ghz and it worked, At 4.02 Ghz it was very stable, My CPU Temp was at 39C, Is that good?, Ill stay here untill you reply, I cant go upto 4.5Ghz?, I dont really understand, Iv seen people go upto 4.5Ghz without any problems.
Yes it was with AMD FX 4130
Will it be my power supply?.
well you need a good cpu cooler like a hyper evo 212 or better to get to that or the temps will get to high. also you need to stress test with prime 95 to see if your overclock is good. you also need a good psu to supply the extra power.
-
Reply to kunthakenthe
m
0
l
MrAlanSmith
August 23, 2014 11:03:04 PM
kunthakenthe said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
Beezy said:
MrAlanSmith said:
I have overclocked my AMD FX 4130 to 4.02 Ghz ..I dont understand why im getting that 0.2ghz more meaning 4.02 Ghz, I only want 4.0 Ghz
Why am i getting this 0.2? I dont understand?
This makes 0 sense. I want to help but you need to realize, if youre going to make post, read it through, preview it, and then post it. Edit the (OP) original post to make sense...either way its probably the front side bus settings on auto, its in the BIOS, did you change it to 200?
This question does make sense, Please can you just leave this post?, Honeslty!
Ha, good luck with your problem. I already gave you the answer twice though.
I can not see front side bus in my Bios .... I have the Asrock N68-VS3 FX Motherboard.
43 seconds into this video, i think the setting that says CPU frequency is the front side bus setting.
https://www.youtube.com/watch?v=I6Noj7p2yiQ
It was set at 200 anyways, I put it at 175?, Ok?, i think if i go over 200 my pc wont boot.
hm, if its at 200 even and the multiplier goes in interval of .5 (10x 10.5x 11x 11.5x so on so forth) it should come to an even number of Ghz. The only other thing i can think of is the windows power management settings in control panel, it can throttle the CPU and result is different weird clock rates. (Control panel/ Power options/ advanced power options/ processor power management)
I need to go back into my Bios, I turned down the CPU frequency and my PC is only at 3.51 GHz xD lol
I was going back and furth into the bios and keeped going up on the CPU where you overclock to get more Ghz and it worked, At 4.02 Ghz it was very stable, My CPU Temp was at 39C, Is that good?, Ill stay here untill you reply, I cant go upto 4.5Ghz?, I dont really understand, Iv seen people go upto 4.5Ghz without any problems.
Yes it was with AMD FX 4130
Will it be my power supply?.
well you need a good cpu cooler like a hyper evo 212 or better to get to that or the temps will get to high. also you need to stress test with prime 95 to see if your overclock is good. you also need a good psu to supply the extra power.
Can you help me with this 4.42 Ghz?, What is with this 2?.
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith
August 23, 2014 11:08:09 PM
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith said:
kunthakenthe said:
dont sweat it man thats extra performance its nothing to be worried about. the whole point of overclocking is better performance so having a extra .02mhz isnt bad. you probably will have to turn your stock cooler fan to max to get it to 4.4ghz-4.5.Ahh ok, How do i do that?
go into the bios and see if you can find the stock cooler or something like that turn the fan all the way up and see how well it cools the temp. I wouldnt recommend it though i recommend you just get a hyper evo 212 for a stable and cool overclock. or a better noctua/phanteks or h90/h100 for a better higher overclock.
PCPartPicker part list / Price breakdown by merchant
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler ($99.98 @ OutletPC)
CPU Cooler: Phanteks PH-TC12DX_BK 68.5 CFM CPU Cooler ($59.99 @ Amazon)
CPU Cooler: Noctua NH-D15 82.5 CFM CPU Cooler ($74.99 @ NCIX US)
Total: $234.96
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2014-08-24 18:29 EDT-0400
-
Reply to kunthakenthe
m
0
l
MrAlanSmith
August 24, 2014 4:10:38 PM
kunthakenthe said:
MrAlanSmith said:
kunthakenthe said:
dont sweat it man thats extra performance its nothing to be worried about. the whole point of overclocking is better performance so having a extra .02mhz isnt bad. you probably will have to turn your stock cooler fan to max to get it to 4.4ghz-4.5.Ahh ok, How do i do that?
go into the bios and see if you can find the stock cooler or something like that turn the fan all the way up and see how well it cools the temp. I wouldnt recommend it though i recommend you just get a hyper evo 212 for a stable and cool overclock. or a better noctua/phanteks or h90/h100 for a better higher overclock.
PCPartPicker part list / Price breakdown by merchant
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler ($99.98 @ OutletPC)
CPU Cooler: Phanteks PH-TC12DX_BK 68.5 CFM CPU Cooler ($59.99 @ Amazon)
CPU Cooler: Noctua NH-D15 82.5 CFM CPU Cooler ($74.99 @ NCIX US)
Total: $234.96
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2014-08-24 18:29 EDT-0400
Iv overclocked my CPU and crappy graphic card and both stable, Iv asked around and showed my temps and they said its fine, Nofin to worry about at all!
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith said:
kunthakenthe said:
MrAlanSmith said:
kunthakenthe said:
dont sweat it man thats extra performance its nothing to be worried about. the whole point of overclocking is better performance so having a extra .02mhz isnt bad. you probably will have to turn your stock cooler fan to max to get it to 4.4ghz-4.5.Ahh ok, How do i do that?
go into the bios and see if you can find the stock cooler or something like that turn the fan all the way up and see how well it cools the temp. I wouldnt recommend it though i recommend you just get a hyper evo 212 for a stable and cool overclock. or a better noctua/phanteks or h90/h100 for a better higher overclock.
PCPartPicker part list / Price breakdown by merchant
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler ($99.98 @ OutletPC)
CPU Cooler: Phanteks PH-TC12DX_BK 68.5 CFM CPU Cooler ($59.99 @ Amazon)
CPU Cooler: Noctua NH-D15 82.5 CFM CPU Cooler ($74.99 @ NCIX US)
Total: $234.96
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2014-08-24 18:29 EDT-0400
Iv overclocked my CPU and crappy graphic card and both stable, Iv asked around and showed my temps and they said its fine, Nofin to worry about at all!
thats good then its just it usually recommend to use a aftermarket cooler. alright see if you can up the speed of the cpu cooler fan to the max(or max your ears can take) then try overclocking it and STRESS TESTING. Its super important to stress test to make sure the temps are good and eleticity is enough,etc.
-
Reply to kunthakenthe
m
0
l
MrAlanSmith
August 24, 2014 4:40:55 PM
kunthakenthe said:
MrAlanSmith said:
kunthakenthe said:
MrAlanSmith said:
kunthakenthe said:
dont sweat it man thats extra performance its nothing to be worried about. the whole point of overclocking is better performance so having a extra .02mhz isnt bad. you probably will have to turn your stock cooler fan to max to get it to 4.4ghz-4.5.Ahh ok, How do i do that?
go into the bios and see if you can find the stock cooler or something like that turn the fan all the way up and see how well it cools the temp. I wouldnt recommend it though i recommend you just get a hyper evo 212 for a stable and cool overclock. or a better noctua/phanteks or h90/h100 for a better higher overclock.
PCPartPicker part list / Price breakdown by merchant
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler ($99.98 @ OutletPC)
CPU Cooler: Phanteks PH-TC12DX_BK 68.5 CFM CPU Cooler ($59.99 @ Amazon)
CPU Cooler: Noctua NH-D15 82.5 CFM CPU Cooler ($74.99 @ NCIX US)
Total: $234.96
Prices include shipping, taxes, and discounts when available
Generated by PCPartPicker 2014-08-24 18:29 EDT-0400
Iv overclocked my CPU and crappy graphic card and both stable, Iv asked around and showed my temps and they said its fine, Nofin to worry about at all!
thats good then its just it usually recommend to use a aftermarket cooler. alright see if you can up the speed of the cpu cooler fan to the max(or max your ears can take) then try overclocking it and STRESS TESTING. Its super important to stress test to make sure the temps are good and eleticity is enough,etc.
Can you recommand me a aftermarket cooler?, Is that for the back?, I have a spare fan space at the back by the power supply, is that what your talking about?.
-
Reply to MrAlanSmith
m
0
l
MrAlanSmith
August 24, 2014 6:10:59 PM
-
Reply to kunthakenthe
m
0
l
Related resources
- I need fast help about a GPU and PSU Forum
- Question about Q6600 and overclocking and really I need your answers.. Forum
- SolvedFirst Build Best Cooling Solution? Really need help!! i7 4770k w/GTX 780 Possible Overclock to 4.2 GHz Forum
- Need help! FAST! Comp won't start after overclocking! Forum
- SolvedDo I really need a CPU and motherboard today that supports overclocking? Forum
- I have a 4770k and I'm about to get an H80i, I need overclocking help Forum
- SolvedNeed help to build a Fast PC for 500$ (maybe more funds) (hardly any gaming) Forum
- Needed help about buying the 4850 Fast plx buying very soon... Forum
- GUYS I really need help ive asked everywhere but no help....its about. Forum
- SolvedProblems with Gigabyte motherboard - need help fast! Forum
- Quick question about RAM in my new system, I really need help. Forum
- SolvedNEED HELP FAST! Dont want to buy the wrong parts! Forum
- SolvedIs it compatible?(Need help fast) Forum
- SolvedNeed fast help with psu for ASUS R9 290X DirectCU II OC 4 GB Forum
- SolvedScreen goes black and the PC shuts down. Need help fast! Forum
- More resources
Read discussions in other Overclocking categories
!