- Apr 14, 2009
- 287
- 0
- 18,810
Hi there i have an annoying problem were my bios will not save what i input i'm using the FX 8320 CPU i disabled the AI Overclock Tuner and the AMD Turbo Core Technology like other posters have mentioned to manually add my settings but the problem is the CPU ratio is stuck on auto the stock clock is 17.5 hence 3500mhz but what ever i type it reverts to auto in front of my eyes as soon as i click of it also i saved the profile to profile 1 hit F10 to save and restart and it reverts to 3500MHZ
D.0.C.P.wont allow me to change any settings at all everything is stuck to auto others have mentioned disabling CPU Spread Spectrum which has made no difference the board was brand new so the CMOS battery isn't dead any solutions its quite frustrating usually on the older boards it was increase the CPU multiplier and maybe add a few CPU volts and test it with Prime 95 to test stability done.
Has anyone else had these issues and found a solution been sitting here for hours looking for a solution possibly flash the bios if i feel confident enough
Cheers
Joe
D.0.C.P.wont allow me to change any settings at all everything is stuck to auto others have mentioned disabling CPU Spread Spectrum which has made no difference the board was brand new so the CMOS battery isn't dead any solutions its quite frustrating usually on the older boards it was increase the CPU multiplier and maybe add a few CPU volts and test it with Prime 95 to test stability done.
Has anyone else had these issues and found a solution been sitting here for hours looking for a solution possibly flash the bios if i feel confident enough
Cheers
Joe
Facebook
Twitter
Instagram