EDIT: OK GUYS TURNS OUT IM AN ABSOLUTE IDIOT. THE 24 PIN CONNECTOR WASNT FULLY CLICKED IN AND WHEN I WOULD STAND IT UP THE WEIGHT OF THE WIRES ON TOP WERE CAUSING IT TO COME LOOSE!! THANKS ANYWAYS GUYS
So I went to turn my custom built PC on today and nothing. I checked the wires and they were all in place. I plugged it into different sockets and still nothing. When I plug it out and plug it in after a minute or so everything in the PC lights up for a second then absolutely nothing!! It has been working perfectly for the last week and even last night I had it running fine and turned it off properly. My parts are a
z87 g41 board
an i5 4670k cpu
8gb 1600mhz ram
Sapphire r9 270x toxic gpu
And a corsair cx500m psu
I also have 3 fans one attached directly to the psu
Please help!!
So I went to turn my custom built PC on today and nothing. I checked the wires and they were all in place. I plugged it into different sockets and still nothing. When I plug it out and plug it in after a minute or so everything in the PC lights up for a second then absolutely nothing!! It has been working perfectly for the last week and even last night I had it running fine and turned it off properly. My parts are a
z87 g41 board
an i5 4670k cpu
8gb 1600mhz ram
Sapphire r9 270x toxic gpu
And a corsair cx500m psu
I also have 3 fans one attached directly to the psu
Please help!!
Facebook
Twitter
Instagram