Sign in with
Sign up | Sign in
Your question

Black screen, if i try dual channel.

Tags:
  • Asus
  • DDR3
  • Dual Channel
  • Motherboards
  • Memory
Last response: in Memory
Share
August 27, 2014 12:08:38 PM

I have:
4 gb 1333MHz DDR3
2gb 1333MHz DDR3
Motherboard: Asus H61M-K.
So, both stick work great separate. But if i put them together, there is no picture on the monitor/TV and other.
What´s the problem? i read that it will be OK, if i put different sizes (i mean in gb) RAMs in dual channel.

Other specs: i5 3470, corsair vs 550 w, r9 280x.

I will be very thankfull, if i get them to work as dual channel and have 6gb of ram.

PS, sorry about my english, its not my native language.

More about : black screen dual channel

a c 985 Ĉ ASUS
a c 1798 V Motherboard
a c 2285 } Memory
August 27, 2014 4:52:52 PM

Try with just the 4GB stick in slot 1 go into BIOS make sure timings are correct and raise DRAM voltage + 0.065 from spec (if 1.5 set to 1.565) save exit shutdown and add the 2 GB in slot 2 and give it a try
m
0
l
August 27, 2014 10:10:23 PM

Tradesman1 said:
Try with just the 4GB stick in slot 1 go into BIOS make sure timings are correct and raise DRAM voltage + 0.065 from spec (if 1.5 set to 1.565) save exit shutdown and add the 2 GB in slot 2 and give it a try

What do you mean by ,,make sure timings are correct,,? There is everything on Auto. Both A and B DIMM are enabled.

I have an asus bios 0607 version, and there is no option such as ,,ram or dram voltage,,. I googled, searched in AI tweaker, timing controll, everywhere, it hides better than Osama Ben Laden...
m
0
l
Related resources
August 29, 2014 6:35:52 AM

Up.
m
0
l
a c 985 Ĉ ASUS
a c 1798 V Motherboard
a c 2285 } Memory
August 29, 2014 9:31:32 AM

Make sure the DRAM timings in the BIOS match those on the sticks
m
0
l
September 3, 2014 12:12:20 PM

Got ABSOLUTELY same RAMs, both crucial, both 4 gb, both 1600mhz. Black screen again, its makes me sad more than Hatiko.
m
0
l
a c 985 Ĉ ASUS
a c 1798 V Motherboard
a c 2285 } Memory
September 3, 2014 12:40:31 PM

You have the sticks in AUTO - that is the BIOS determining what it thinks is best opposed to running the sticks to their specifications as to what they should run at, will want to set them to the stick's specs
m
0
l
!