- Aug 28, 2014
- 1
- 0
- 4,510
My RAM is clocked at 2133 however its default is 1600.
I have tried using the XMP profiles but it boots several times before loading optimized settings.
If I manually input speed, latency and voltage the same result occurs.
From what I can tell the RAM and speed is supported. What am I overlooking or doing wrong?
Hardware in question:
i5 5670K
Gigabyte GA-Z87-OC
http://www.gigabyte.com.au/products/product-page.aspx?pid=4514#sp
G.Skill Ares 16GB
http://www.gskill.com/en/product/f3-2133c11q-16gao
Any help would be greatly appreciated guys.
Andrew.
I have tried using the XMP profiles but it boots several times before loading optimized settings.
If I manually input speed, latency and voltage the same result occurs.
From what I can tell the RAM and speed is supported. What am I overlooking or doing wrong?
Hardware in question:
i5 5670K
Gigabyte GA-Z87-OC
http://www.gigabyte.com.au/products/product-page.aspx?pid=4514#sp
G.Skill Ares 16GB
http://www.gskill.com/en/product/f3-2133c11q-16gao
Any help would be greatly appreciated guys.
Andrew.
Facebook
Twitter
Instagram