AMD A10 vs. i7 for Autocad

Prettycat

Reputable
Aug 28, 2014
1
0
4,510
Hi,

I'm trying to decide between buying the HP Pavilion H119 All-In-One Pc and any other Desktop with a core i7, mainly for Autocad and Sketch-up purposes. I am a student, and the all-in-one appeals to me because it doesn't have the ugly, separate and boxy CPU. But, will an all-in-one meet my student needs?

Thanks,
Jen

 
Solution


I would disagree. AutoCad is demanding. Have you read the system requirements for the software?
http://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-AutoCAD-2015.html

They recommend Intel Xeon or AMD Opteron CPUs which are server CPUs. So cores, hyperthreading and processor instruction sets are important. The college I graduated from had iMacs with i7s and 8GB RAM in each one. AutoCad is a no joke software. If AutoCad is used for hobby, it may not be necessary for a stout PC. If used for school or work, it's required.

barto

Expert
Ambassador


I would disagree. AutoCad is demanding. Have you read the system requirements for the software?
http://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/System-requirements-for-AutoCAD-2015.html

They recommend Intel Xeon or AMD Opteron CPUs which are server CPUs. So cores, hyperthreading and processor instruction sets are important. The college I graduated from had iMacs with i7s and 8GB RAM in each one. AutoCad is a no joke software. If AutoCad is used for hobby, it may not be necessary for a stout PC. If used for school or work, it's required.
 
Solution

LookItsRain

Distinguished
I ran autocad for a semester class on a 600 dollar laptop...
i5 3210m
7670m

If you read the requirements, you will see a pentium 4 in the same box as the xeon etc. Its stating the needed instruction set for the CPU, a toaster can run autocad.

Anyways, as long as you have enough ram, it wont matter.