Sign in with
Sign up | Sign in
Your question

Aerocool XPredator Evil Black Edition, tool free GPU bays...

Tags:
  • GPUs
  • Aerocool
  • Graphics
August 30, 2014 6:06:55 AM

Hey guys,

So back in March I built my new rig (basic specs will be at the bottom) its an ok spec, plays pretty much every game at ultra graphics at the moment which is more than good enough, obviously!

However, when I was building I noticed that my case (Aerocool XPredator Evil Black) had tool free GPU bays... What was more unnerving is that the clips that were in place of where you would normally screw didn't go all the way down and there was no click or any kind of way and it locking into place as it were, so it does not feel like my GPU is sitting properly in the bay... I Googled it and found that no one has posted anything similar and Aerocool were useless in getting back to me when I emailed them... So now a few months down the line I'm thinking about getting a new case in which I can just screw my GPU in... But before I do that I just wanna get a second opinion...

So if you were in my situation... The clips of the tool free GPU bay were not going all the way down and there was nothing actually holding the GPU in place... Would this worry you? And what sort of action would you take to combat it as it were?

Kind Regards.

Fermit.


Comp Specs:
Case: Aerocool XPredator Evil Black
PSU: Corsair AX860i
CPU: AMD FX 8350 4.0GHz
RAM: 16GB DDR3
MB: ASUS Crosshair V Formula Z
GPU: NVIDIA GeForce GTX 780 (3GB)
HDD: 2x 1TB SATA

More about : aerocool xpredator evil black edition tool free gpu bays

!