Sign in with
Sign up | Sign in
Your question

another dead mother board or gpu?

Tags:
  • GPUs
  • Motherboards
  • Graphics
Last response: in Graphics & Displays
Share
September 1, 2014 3:31:42 PM

So I recently had to swap mother boards due to one being dead and now when I turn on my system I am not getting a signal on my monitor I have tried removing the cmos battery moving the cards around and taking one out. I do not have a speaker to hear the beeps

More about : dead mother board gpu

September 1, 2014 3:41:06 PM

try booting with the onboard graphics
m
0
l
September 1, 2014 3:44:18 PM

Does the motherboard have a video output? Vga or hdmi? because you could check out if that works.. if it does its the gpu, if it doesnt well.. its your mobo or cpu
m
0
l
Related resources
a c 491 V Motherboard
September 1, 2014 4:10:52 PM

make sure the motherboard has the right bios file to post with your cpu.
m
0
l
September 1, 2014 4:29:54 PM

The motherboard doesn't have on board graphics.
m
0
l
September 1, 2014 4:35:18 PM

Does any light on the mobo show up?? If not try and turning on you psu separately and i mean the connecting the two pins on the psu trick.. the paperclip test , just make sure its unpluged when you do the connection , test if it works and unpug it again before you remove the paperclip! Dont get yourself shocked please!
m
1
l
September 1, 2014 5:03:07 PM

Lights on the mother board do light up as well as the motor on liquid cooling that is plugged into the mother board
m
0
l
September 1, 2014 5:51:08 PM

Ok then its not a psu problem , then you definetely need one of these..
A speaker to hear the beeps
OR
A new gpu, any will do.

On the other hand.. why did the last mother died?? was it a lighting that struckd ?? IF so it may have damaged the video card too
m
0
l
September 1, 2014 5:54:56 PM

I have 2 660s an neither are working. did it fry them both?!
m
0
l
September 1, 2014 5:59:14 PM

Also I don't belive that it was struck I just left my computer for many an hour or so to come back to a black screens even though they were still on. After that I turned it back on only to see it turn off completely that's when I replaced the mobo
m
0
l
September 1, 2014 6:02:48 PM

hmm thats weird.. what psu are you using?
m
0
l
September 1, 2014 6:16:03 PM

650 watt by antec
m
0
l
September 1, 2014 7:36:16 PM

Bro! leaving me hanging?
m
0
l
!