hi everyone,
I've built a m-itx setup with a MSI z87i gaming ac motherboard but i'm facing a problem when i turn it on.
Whenever i boot it the screen shows error codes at the bottom right corner including the 9C code hanging at around 15-20 sec followed with a A2 code hanging at 2 sec and it eventually boots to Windows. One thing that i've noticed is that when i disconnect all the devices that use USB the 9C code disappears but comes back once i connect something to a USB and boot the second time.
I just want to ask is there a way to fix this and make it run properly because its a headache to wait for windows especially when you have it powered with a SSD.
My PC specs if you need them:
Motherboard: MSI z87i gaming ac
CPU: i5 4670K
RAM: Corsair Vengeance Pro 1866Mhz 8gb
GPU: R9 290
HDD: Seagate Barracuda 2tb
SSD: Kingston HYPERX Fury 120gb
Case: Corsair 250D
PSU: Corsair CX750M
Cooler: Corsair H100i
(Yeh, there's a lot of stuff from corsair)
Thanks.
I've built a m-itx setup with a MSI z87i gaming ac motherboard but i'm facing a problem when i turn it on.
Whenever i boot it the screen shows error codes at the bottom right corner including the 9C code hanging at around 15-20 sec followed with a A2 code hanging at 2 sec and it eventually boots to Windows. One thing that i've noticed is that when i disconnect all the devices that use USB the 9C code disappears but comes back once i connect something to a USB and boot the second time.
I just want to ask is there a way to fix this and make it run properly because its a headache to wait for windows especially when you have it powered with a SSD.
My PC specs if you need them:
Motherboard: MSI z87i gaming ac
CPU: i5 4670K
RAM: Corsair Vengeance Pro 1866Mhz 8gb
GPU: R9 290
HDD: Seagate Barracuda 2tb
SSD: Kingston HYPERX Fury 120gb
Case: Corsair 250D
PSU: Corsair CX750M
Cooler: Corsair H100i
(Yeh, there's a lot of stuff from corsair)
Thanks.
Facebook
Twitter
Instagram