Replacement SSD not recognized

Toggle sidebar Toggle sidebar
Status
Not open for further replies.
R

raston

Reputable
Sep 2, 2014
1
0
4,510
I have a lenov B575 which is running slow. I bought a Toshiba 128 GB SSD to make it faster. I cloned the hdd with Apricorn software. Through the USB data transfer cable I could see files on the SSD. When I replaced the hdd with the clone SSD, it was not recognized. I went into BIOS, f2, and could not see it. I reinstalled the hdd and was able to see the SSD through the cable again. So the hardware seems to be working..? Any suggestions?

Thanks,

Rick
 
Solution
S
if you are able to boot with your old HD................. start/right click computer/manage/disk management........... see if the SSD is there. if it is/format............. then go to my computer just to verify or reboot and verify............ then you should be able to do your transfer and your SSD should work.................

ssd/ahci.............. bios..??
Sort by date Sort by votes
S

swifty_morgan

Illustrious
Feb 10, 2006
13,566
1
42,960
if you are able to boot with your old HD................. start/right click computer/manage/disk management........... see if the SSD is there. if it is/format............. then go to my computer just to verify or reboot and verify............ then you should be able to do your transfer and your SSD should work.................

ssd/ahci.............. bios..??
 
Upvote 0 Downvote
Solution
Status
Not open for further replies.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom