PC RE-Start Automatically

MAXSAN20 · Sep 8, 2014

hi my Pc automatically restart after 2 or 2 & half hours. some time its won't start after restart and monitor show no analog signal and went in sleeping mode. i remove My GT-9400 but still have the same problem, try after removing newly installed 2GB ram Stick . but still have same problem i also check the temperature but its does not not heating. can any provide any solutions

sandeep

MostWantedSoulRider · Sep 8, 2014

Hi Sandeep,

Please provide us the complete build (like what cpu cooler do you use, PSU brand and its watt supply, etc) and the maximum temperature recorded during the load. The problem(s) can be found anywhere -

a) Overheating processor

b) Faulty/Insufficient power supply from the PSU

c) Improper troubleshooting of Power Options in Control Panel

Note: Did you install any other RAM chip after removing the existing ones?

MAXSAN20 · Sep 8, 2014

MostWantedSoulRider :

hello bro i will note the temperature again and give u exact detail tomorrow other detail are following

i am not using any other cooler

i am using an intel make motherboard,
with Intex 450 Watt classic SMPS
Viewsonic VA1912w 19" LCD Monitor

MostWantedSoulRider · Sep 8, 2014

Okay, OP. Keep an eye on PSU/SMPS, anyway. Use BurnInTest (most trusted stressing application) and CPUHW Monitor together to read the temperature.

MAXSAN20 · Sep 9, 2014

actually my pc restart suddenly that after 1-2 hourse so cant get the exact temperature when it re-start is there are any software that can log the cpu & gpu temperature at every interval

MostWantedSoulRider · Sep 9, 2014

As stated above, use BurnInTest application. It runs for 10 minutes tops. Open CPUHW Monitor (for reading the temperature at every interval) at first and then, run the test (for stressing the processor to the full extent).

MAXSAN20 · Sep 10, 2014

hi use speed fan and Burnln test both around 30 min here are the result

brunln test

MostWantedSoulRider :

MostWantedSoulRider · Sep 10, 2014

You used both for 30 minutes? How could it be? The BurnInTest's CPU stress test runs only for 10 minutes. If you have posted a screenshot of the temperature reading after 30 minutes, then it shows idle temperature.

MAXSAN20 · Sep 11, 2014

only speedfan run for 30 min brunin test only for 15 min, so what should i do change ram slot from blue to black or change the smps or use cooler fan i am using intex orion Case

Test Start time Tue Sep 09 20:08:30 2014
Test Stop time Tue Sep 09 20:23:36 2014
Test Duration 000h 15m 06s
Temperature HDD 0 (ST3500418AS ATA Device) (Min/Current/Max) 35.0C / 39.0C / 39.0C
Temperature HDD 3 (Seagate Backup+ BK USB Device) (Min/Current/Max) NA / NA / NA

Search

PC RE-Start Automatically

MAXSAN20

Distinguished

MostWantedSoulRider

Reputable

MAXSAN20

Distinguished

MostWantedSoulRider

Reputable

MAXSAN20

Distinguished

MostWantedSoulRider

Reputable

MAXSAN20

Distinguished

MostWantedSoulRider

Reputable

MAXSAN20

Distinguished

TRENDING THREADS

Latest posts

Moderators online

Share this page