Sign in with
Sign up | Sign in
Your question
Solved

Right memory configuration.

Tags:
  • DDR3
  • Configuration
  • Components
  • Memory
Last response: in Components
Share
September 9, 2014 4:32:21 PM

Hello guys, I just want to know if I have the right configuration. I just got the G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBXL and this is what I got from CPU-Z:

Memory SPD
-------------------------------------------------------------------------

DIMM # 1
SMBus address 0x52
Memory type DDR3
Module format UDIMM
Manufacturer (ID) G.Skill (7F7F7F7FCD0000000000)
Size 4096 MBytes
Max bandwidth PC3-12800 (800 MHz)
Part number F3-12800CL9-4GBXL
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP yes
XMP revision 1.2
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-16-22 @ 457 MHz
JEDEC #2 7.0-7-7-19-26 @ 533 MHz
JEDEC #3 8.0-8-8-22-30 @ 609 MHz
JEDEC #4 9.0-9-9-24-33 @ 685 MHz
JEDEC #5 10.0-10-10-27-37 @ 761 MHz
JEDEC #6 11.0-11-11-28-39 @ 800 MHz
XMP profile XMP-1600
Specification PC3-12800
Voltage level 1.500 Volts
Min Cycle time 1.250 ns (800 MHz)
Max CL 9.0
Min tRP 10.88 ns
Min tRCD 10.88 ns
Min tWR 15.00 ns
Min tRAS 29.63 ns
Min tRC 40.88 ns
Min tRFC 160.00 ns
Min tRTP 7.50 ns
Min tRRD 6.00 ns
Command Rate 2T
XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
XMP #1 9.0-9-9-24-33-2T @ 800 MHz (1.500 Volts)

DIMM # 2
SMBus address 0x53
Memory type DDR3
Module format UDIMM
Manufacturer (ID) G.Skill (7F7F7F7FCD0000000000)
Size 4096 MBytes
Max bandwidth PC3-12800 (800 MHz)
Part number F3-12800CL9-4GBXL
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP yes
XMP revision 1.2
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-16-22 @ 457 MHz
JEDEC #2 7.0-7-7-19-26 @ 533 MHz
JEDEC #3 8.0-8-8-22-30 @ 609 MHz
JEDEC #4 9.0-9-9-24-33 @ 685 MHz
JEDEC #5 10.0-10-10-27-37 @ 761 MHz
JEDEC #6 11.0-11-11-28-39 @ 800 MHz
XMP profile XMP-1600
Specification PC3-12800
Voltage level 1.500 Volts
Min Cycle time 1.250 ns (800 MHz)
Max CL 9.0
Min tRP 10.88 ns
Min tRCD 10.88 ns
Min tWR 15.00 ns
Min tRAS 29.63 ns
Min tRC 40.88 ns
Min tRFC 160.00 ns
Min tRTP 7.50 ns
Min tRRD 6.00 ns
Command Rate 2T
XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
XMP #1 9.0-9-9-24-33-2T @ 800 MHz (1.500 Volts)

DIMM # 1
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 92 10 0B 02 03 19 00 09 03 52 01 08 0A 00 FC 00
10 69 78 69 30 69 11 18 81 00 05 3C 3C 00 F0 83 81
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 0F 11 21 01
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 04 CD 00 00 00 00 00 00 00 24 48
80 46 33 2D 31 32 38 30 30 43 4C 39 2D 34 47 42 58
90 4C 00 00 00 04 CD 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 0C 4A 0D 12 01 08 00 00 00 2A 0A 57 20 00 46 57
C0 57 78 10 ED 47 3F 00 00 05 3C 30 00 F0 3C 00 00
D0 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

DIMM # 2
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 92 10 0B 02 03 19 00 09 03 52 01 08 0A 00 FC 00
10 69 78 69 30 69 11 18 81 00 05 3C 3C 00 F0 83 81
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 0F 11 21 01
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 04 CD 00 00 00 00 00 00 00 24 48
80 46 33 2D 31 32 38 30 30 43 4C 39 2D 34 47 42 58
90 4C 00 00 00 04 CD 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 0C 4A 0D 12 01 08 00 00 00 2A 0A 57 20 00 46 57
C0 57 78 10 ED 47 3F 00 00 05 3C 30 00 F0 3C 00 00
D0 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


Monitoring
-------------------------------------------------------------------------

Mainboard Model A785GM-AD3 (0x0000025E - 0x137A0D98)

LPCIO
-------------------------------------------------------------------------

LPCIO Vendor ITE
LPCIO Vendor ID 0x90
LPCIO Chip ID 0x8726
LPCIO Revision ID 0x3
Config Mode I/O address 0x2E
Config Mode LDN 0x4
Config Mode registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 87 26 03 10 00 40 C4 02 42 00 00 00 04 00 00 00
30 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 0E 80 0E 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 02 00 00 04 04 00 00 00 00 00 00 00 00 00 00
Register space LPC, base address = 0x0E80


Should I do something else or that's fine?

Thanks.

More about : memory configuration

September 9, 2014 4:49:35 PM

Do you have more than 2 slots? If so most motherboards color code the slots and have a guide in the mobo manual
m
0
l
September 9, 2014 5:50:44 PM

Hi, yes, I have 4. The manual says that the 3th and 4th are better for dual channel, I have those sticks as recommended but I just want to know if they are running as they should since I don't know what JEDEC #x means on CPU-Z, but under XMP-1600 it says 800mhz.

I wish I could add some screeenshots so you can see what I'm talking about.
m
0
l

Best solution

September 9, 2014 5:52:22 PM

Ah yeah, dual channel 1600 mHz means each is running at 800
Share
!