Sign in with
Sign up | Sign in
Your question

I want to "slave" a tv to receive same channels from a tv receiving Google Fiber Optics programming.

Tags:
  • TV
  • Google
Last response: in Linux/Free BSD
Share
September 11, 2014 7:51:02 AM

Run two tvs from same google fiber optic tv box and receive same channel on both tvs.

More about : slave receive channels receiving google fiber optics programming

September 11, 2014 8:00:19 AM

Assuming the fiber optic TV box picks the channel, you'll simply need a distributor for whatever type of output the box has. For example, if you are using an HDMI output on the fiber optic box, you'll need a distributor that has one HDMI input, and at least two HDMI outputs. If the TV box has more than one type of output - for example, an HDMI, and a set of three A/V jacks - you might be able to hook up one TV with out of those outputs, and another with the other.
m
0
l
September 11, 2014 8:13:43 AM

Generally I have found you can use a simple video co ax cable from one tv out to the other ones in and the 2nd tv will show whatever the first one is showing.
Works fine in bars, anyway.
m
0
l
Related resources
September 11, 2014 1:30:09 PM

tea urchin said:
Generally I have found you can use a simple video co ax cable from one tv out to the other ones in and the 2nd tv will show whatever the first one is showing.
Works fine in bars, anyway.


My tvs don't have an "out" It was easy on broadband cable with splitters. Are fiber optic cable splitters?, will see.
m
0
l
September 11, 2014 1:31:55 PM

mgilbert said:
Assuming the fiber optic TV box picks the channel, you'll simply need a distributor for whatever type of output the box has. For example, if you are using an HDMI output on the fiber optic box, you'll need a distributor that has one HDMI input, and at least two HDMI outputs. If the TV box has more than one type of output - for example, an HDMI, and a set of three A/V jacks - you might be able to hook up one TV with out of those outputs, and another with the other.


m
0
l
September 11, 2014 1:34:51 PM

The tvs I want to use as slaves don't have hdmi. some don't have a/v only audio and use coax for video. Thanks.
m
0
l
!