Hi,
I've got new parts to my PC, and after installing them and pressing the power button the lights turn on, the CPU cooler's and the graphics card fan start spinning (faster and louder than normally), but nothing happens on the screen. However, after about five minutes the motherboard welcome screen comes up, and the computer beeps once, after that a screen comes up that writes:'Press DEL to enter boot menu', but it seems the pc doesn't recognise usb keyboard, because I can't enter boot setup, after that screen it writes: 'no bootable device, press any button to reset', but again nothing happens when I press a button.
There is no operating system on the hard drive, I would like to boot from USB pendrive.
When I get out the RAM sticks, it beeps immediately after powering up, and I tried two different brands of RAM.
Hardware specs:
AMD-FX 8320 black box edition (new)
MSI 760GA-P43 (FX) (new)
Chieftec CTG 500-80P (tested working with another processor and motherboard)
Western Digital Caviar Blue WD10EZEX (new)
CoolerMaster Hyper TX3 EVO (tested working with another processor and motherboard)
Gygabite Radeon HD 5450
I performed all steps systematically that can be found at link below:
http://www.tomshardware.co.uk/forum/261145-31-perform-steps-posting-post-boot-video-problems
Any help or suggestion will be highly appreciated!
I've got new parts to my PC, and after installing them and pressing the power button the lights turn on, the CPU cooler's and the graphics card fan start spinning (faster and louder than normally), but nothing happens on the screen. However, after about five minutes the motherboard welcome screen comes up, and the computer beeps once, after that a screen comes up that writes:'Press DEL to enter boot menu', but it seems the pc doesn't recognise usb keyboard, because I can't enter boot setup, after that screen it writes: 'no bootable device, press any button to reset', but again nothing happens when I press a button.
There is no operating system on the hard drive, I would like to boot from USB pendrive.
When I get out the RAM sticks, it beeps immediately after powering up, and I tried two different brands of RAM.
Hardware specs:
AMD-FX 8320 black box edition (new)
MSI 760GA-P43 (FX) (new)
Chieftec CTG 500-80P (tested working with another processor and motherboard)
Western Digital Caviar Blue WD10EZEX (new)
CoolerMaster Hyper TX3 EVO (tested working with another processor and motherboard)
Gygabite Radeon HD 5450
I performed all steps systematically that can be found at link below:
http://www.tomshardware.co.uk/forum/261145-31-perform-steps-posting-post-boot-video-problems
Any help or suggestion will be highly appreciated!