Sign in with
Sign up | Sign in
Your question

My vga connection

Tags:
  • Computers
  • VGA
  • Monitors
  • Connection
  • Graphics
  • Port
Last response: in Graphics & Displays
Share
September 13, 2014 4:44:59 AM

Hey guys,
So id like to know how to fix the problem about my Monitor not recognizing my computer....
The monitor is brand new(so is the computer),and i've seen alot of threads like this none providing the solution.So here goes: I plug in the vga cable into the Pc,Then the monitor,The monitor recognizes the cable(fires up ) and pops out a message saying : No signal-Going into sleep mode soon.....
However,on the lower part of the case there is a HDMI and another port(never ever used it),the hdmi works just fine with my tv(my monitor doesnt have a HDMI port).But the vga port doesnt work on the tv either -.- . So the problem is in the PC port ( cable and monitor are 100% working)
I think u guys could use my PC specs to help me :) 
Processor: AMD Richland A8-Series X4 6600K, 3.9GHz, 4MB
MBO: AMD A55 chipset, FM2
Graphics: AMD Radeon R7 250 1GB DDR5, DX11
.....if you need any more info on my specs let me know.

More about : vga connection

a b C Monitor
September 13, 2014 5:34:09 AM

Have you tried booting into safemode with the vga connected?
m
0
l
September 13, 2014 6:59:19 AM

popatim said:
Have you tried booting into safemode with the vga connected?

I have tried it,but i have to have VGA and the HDMI in to see what im doing...dunno..

P.S
Ive forgot to say that i've installed all motherboard and the graphics card drivers!

m
0
l
Related resources
a b C Monitor
September 13, 2014 8:01:52 AM

What model# vga monitor do you have? I want to make sure its not real old and only runs at 640x480. LoL

Safe mode should run at 800x600 (svga) which should be supported so if its not working I would say you have a defective vga port or it needs to be enabled somehow.

You are using the vga on the r7 and not the one on the mtoherbd right?
GPU to initialize first set as peg or pcie in the bios? (as opposed to the onboard)
m
0
l
September 13, 2014 9:51:41 AM

popatim said:
What model# vga monitor do you have? I want to make sure its not real old and only runs at 640x480. LoL

Safe mode should run at 800x600 (svga) which should be supported so if its not working I would say you have a defective vga port or it needs to be enabled somehow.

You are using the vga on the r7 and not the one on the mtoherbd right?
GPU to initialize first set as peg or pcie in the bios? (as opposed to the onboard)


It's LG 20m35.....anyway monitor is completely fine ,the PC is the problem....either it has to be enabled( id like to know how?) or its broken....which i doubt. I have only one VGA port in the computer,and im not really sure is it on the gpu or on the motherboard......i had a little fun with BIOS now and i found ''onboard devices'''but havent found peg or pcie anywhere near....i can screenshot the bios for u to help me :) 


EDIT: I Solved it,i just had to disable
''integrated graphics''
m
0
l
a b C Monitor
September 14, 2014 7:10:22 AM

*Boom* There is is!

Grats!
m
0
l
!