Sign in with
Sign up | Sign in
Your question

4 Pin PCIE To 6 Pin PCIE Adapter??

Tags:
  • Motherboards
  • PowerColor
  • Graphics
Last response: in Graphics & Displays
Share
September 13, 2014 10:53:51 AM

Can Any One please Help me,because my 500W PSU Has A 4+4 pin PCIE Connector
out of which one of them is being used By motherboard.
I'm Planning to buy Powercolor ATI r7 260X which requires 6 pin PCIE
Is There An Adapter Available In market to sought me out????
:( 

More about : pin pcie pin pcie adapter

a b V Motherboard
September 13, 2014 11:03:20 AM

The 4+4 pin connector is an EPS connector, NOT a PCI-e power connector, the pinout is different.

What power supply do you have? If your 500W PSU doesn't have a single 6 pin PCI-e connector i'd be suspicious of if it can actually do the job, even decent 400W PSUs come with PCI-e connectors.

They do make 4 pin molex to PCI-e adapters, but they really shouldn't be used most of the time, if your PSU doesn't have the right cables it probably isn't up to the job.

For more on the connectors refer here
http://www.playtool.com/pages/psuconnectors/connectors....
m
0
l
Related resources
September 14, 2014 5:32:38 AM

hunter315 said:
The 4+4 pin connector is an EPS connector, NOT a PCI-e power connector, the pinout is different.

What power supply do you have? If your 500W PSU doesn't have a single 6 pin PCI-e connector i'd be suspicious of if it can actually do the job, even decent 400W PSUs come with PCI-e connectors.

They do make 4 pin molex to PCI-e adapters, but they really shouldn't be used most of the time, if your PSU doesn't have the right cables it probably isn't up to the job.

For more on the connectors refer here
http://www.playtool.com/pages/psuconnectors/connectors....


My Powersupply Is Xpro Bulldozer 500W.
Regarding The Solution U provided,It Was Helpful And Appreciated.
Can U plz Suggest few 500W Powersupply so that i can find what i'm looking for??
m
0
l
a b V Motherboard
September 14, 2014 9:18:50 AM

The page for the Xpro bulldozer says it has a 6 pin PCI-e and a 6+2 pin PCI-e connector so you shouldn't need adapters for that PSU. I am concerned that no where on their manufacturers page does it tell you what its current ratings are...
http://www.xproworld.co.in/smps/bulldozer-500w-smps.htm...

Open up your PC and look at the side of your PSU, you should have a sticker similar to the one below on it. The combined power/current for your 12V rails should be at least 400W/33A, if its significantly lower than that i'd look into replacing it.
m
0
l
!