Built pc not booting

jtracyfilm

Reputable
Sep 14, 2014
2
0
4,510
I have a built pc not booting. The fans and lights kick on, but the board won't boot, and I get no power to any USB or visuals. I've troubleshot the cables and memory by trying them in different slots or swapping them out.
The board is a j1900 motherboard processor combo. The 24 pin power plugs from the psu is broken down into a 20 and 4 pin.

Here are pictures from the system. The memory is in the wrong slot, but I have tried it in the first slot, I just took these pictures when I was moving it around to troubleshoot.


http://imgur.com/WOtXfrh
http://imgur.com/qMPTIHz
http://imgur.com/Y9kCvjK
http://imgur.com/VPiASJG
http://imgur.com/HuDUa2F
http://imgur.com/VdDThdc
http://imgur.com/AWkJ5mF
http://imgur.com/mC8lz15

 

jtracyfilm

Reputable
Sep 14, 2014
2
0
4,510

Thanks,

I have already run through these steps, although I realized i never got an internal speaker. Ordering that to see if I can get a beep code potentially.

The big issue I'm having is that the fans are kicking on, just not the motherboard. The power supply is apparently good, it's just like the motherboard isn't getting power.