- Sep 16, 2014
- 34
- 0
- 4,530
-
Multi-million dollar Cheyenne supercomputer auction ends with $480,085 bid — buyer walked away with 8,064 Intel Xeon Broadwell CPUs, 313TB DDR4-2400 ECC RAM, and some water leaks
Processor Compatibility for New Build
- Thread starter Omnicieron
- Start date
- Sep 16, 2014
- 34
- 0
- 4,530
Core i7-4790k
Gigabyte g1 sniper z87
16gb ram hyper x
Gtx 780 6gb edition sc
Corsair 750w power supply
120gb ssd
1T hdd
Gigabyte g1 sniper z87
16gb ram hyper x
Gtx 780 6gb edition sc
Corsair 750w power supply
120gb ssd
1T hdd
- Sep 16, 2014
- 34
- 0
- 4,530
The info is here the 1st CPU http://www.gigabyte.co.nz/support-downloads/cpu-support-popup.aspx?pid=4802
And the BIOS updates are here http://www.gigabyte.co.nz/products/product-page.aspx?pid=4802#bios
And the BIOS updates are here http://www.gigabyte.co.nz/products/product-page.aspx?pid=4802#bios
MeteorsRaining
Champion
- Jul 27, 2014
- 8,346
- 3
- 50,565
Good choice on mobo, have you considered Gaming 7 from Msi or gigabyte? Z97 will be more upgradable as it'll support Broadwell cpus, and with that budget you can easily get a high end one.
Also, if you don't use 4k or tri monitor setup, 3gb will be enough for gpu.
And don't go for Corsair cx/cd/vs/builder series psu, they're all low quality, any 650w psu from EVGA/ antec/ Seasonic/ Xfx will be a lot better choice.
Also, if you don't use 4k or tri monitor setup, 3gb will be enough for gpu.
And don't go for Corsair cx/cd/vs/builder series psu, they're all low quality, any 650w psu from EVGA/ antec/ Seasonic/ Xfx will be a lot better choice.
- Sep 16, 2014
- 34
- 0
- 4,530
- Sep 16, 2014
- 34
- 0
- 4,530
MeteorsRaining
Champion
- Jul 27, 2014
- 8,346
- 3
- 50,565
- Sep 16, 2014
- 34
- 0
- 4,530
Edit to my earlier post. When I specified my motherboard I said a gigabyte g1 sniper z87 but it's actually a gigabyte g1 sniper 5
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,615
- 1,779
- 159,590
G1.Sniper Z87 (rev. 1.1) If you have the right revision of the board the 4790k is supported from the first BIOS release.
- Sep 16, 2014
- 34
- 0
- 4,530
I recently brought an Apevia x Hermes case and discovered that the g1 sniper 5 can't fit this motherboard because the motherboard is an EATX when I thought it was an ATX. Just to reconfirm my fears there is no way that this motherboard will fit this case right?
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,615
- 1,779
- 159,590
- Sep 16, 2014
- 34
- 0
- 4,530
Ok thanks, I decided to order the NZXT source 530 full tower instead and ordered an EVGA supernova 750g2 psu to replace the corsair one
Dark Lord of Tech
Retired Moderator
- Aug 18, 2009
- 128,615
- 1,779
- 159,590
MeteorsRaining
Champion
- Jul 27, 2014
- 8,346
- 3
- 50,565
- Sep 16, 2014
- 34
- 0
- 4,530
TRENDING THREADS
-
-
Question PC stutters and massive FPS drops on every game.- Started by NovemberRaiN404
- Replies: 11
-
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 58
Facebook
Twitter
Instagram