Need a little help.

Ndoni

Honorable
Jun 19, 2013
11
0
10,510
So, I know I'm taking a shot in the dark for getting an awnser here, but I need some advice on upgrading a prebuilt pc I bought, I have an HP Envy 700 that came with an Intel i7-4790, 8gb of ram, a 1tb hdd, AMD Radeon R7 240 graphics card, and a 460watt psu. and I really really want to upgrade some things, first of all, I would like to upgrade my gfx card, probably to a GTX 750 Ti, I am aware I need to upgrade my psu, and I already have a Corsair GS500, here's my first question, can I run that graphics card on that psu? I heard things about amps and voltages and stuff but I'm not fond of that kind of stuff, so I'm concerned about putting new stuff in. My other question is, Can someone explain to me about motherboard shortages, I am concerned that by upgrading this stuff and future parts, that this may happen, what precautions do I take to make sure I don't do this by adding future parts? Unfortunetly, I can't upgrade my motherboard so I am Stuck on that part, and I'm trying to upgrade as much as I can without shorting it out. I hope this all makes sense and I Hope someone can help me out, I would appreciate alot.
 
Solution


Remember 80+ only measures efficiency not quality. Yes the power supply may be able to produce more wattage but if you push it beyond the manufacture's prest then it will be prone to fail.

JimF_35

Distinguished
You could probably get a couple of months out of it before it burns up. I would not chance because some power supplies do not go out quietly in the night. There has been some cases (all be it very few) were a bad power supply will damage other components.

Most recommendations for that GPU is a minimum of 600 watts.
 

Ndoni

Honorable
Jun 19, 2013
11
0
10,510


I see, but this is a high performance cpu is it not? 80 plus certified and everything, Would it be considered as a bad power supply?
 

JimF_35

Distinguished


Remember 80+ only measures efficiency not quality. Yes the power supply may be able to produce more wattage but if you push it beyond the manufacture's prest then it will be prone to fail.
 
Solution