Sign in with
Sign up | Sign in
Your question

PC Boots and works fine but no post bleep after ASUS r9 280x installation

Tags:
  • Asus
  • 280x
  • Radeon
  • Graphics
September 16, 2014 4:34:13 AM

Help needed for R9 280x Issue

Hi There,

I recently bought an Asus R9 280X DirectCU II. When I first installed thePC would not boot. I solved the booting issue by updating my bios to the latest version available (2.13)

The pc boots fine now but I don't get the bleep when it powers up. I had no issues until playing games (battlefield 4 - ultra settings) where after a while it would crash (verticle lines with a solid colour) and would force me to reboot.

With no GFX installed the PC bleeps once on startup as normal. I have recently bought a corsair CX750M power supply and tested it out. same issue, although when gaming I manually set the fan speed to 70% and didnt have any crashing for over 30 mins of gameplay (possible overheating issue previously?)

My hardware is as follows

MSI Z77A-G43 Intel Z77 Socket 1155 DDR3 PCI-Express Motherboard

Intel Core i7-3770K 3.50GHz (Ivy Bridge) Socket LGA1155 Processor

16GB (4x4GB) Corsair Vengeance Blue 1600MHz CL9 DDR3 Dual/Quad Channel Kit [CMZ16GX3M4A1600C9B]

New components are:

Corsair CX750M PSU
Asus R9 280X DirectCU II

Old components are;

XFX HD7770 GFX
Tagan 520w PSU

Running Windows 7 ultimate 64
Amd drivers version 14.4

Pc is built by myself and I am at a loss as to what the issue is.

I hope someone can help!

Many Thanks in advance

Deren

More about : boots works fine post bleep asus 280x installation

Related resources
!