Sign in with
Sign up | Sign in
Your question

Thermal paste, the original H100i, or change Noctua NT-H1

Tags:
  • Noctua
  • Thermal Compound
Last response: in Overclocking
Share
September 16, 2014 10:41:46 AM

Staff have a doubt what would be best to use the thermal paste that already comes standard on Corsair H100i or take and put a Noctua NT-H1 that I have here at home?

More about : thermal paste original h100i change noctua

September 16, 2014 10:45:47 AM

I'm sure the stock stuff would suffice. I use zalman super thermal grease on most of my stuff now. so if you have something you trust, use it.
m
0
l
September 16, 2014 10:47:06 AM

Use the one that's pre applied because ig you add more it will have a opposite effect and make cooling worse, even if it's not already prw applied the one that comes with it is fine
m
0
l
Related resources
September 16, 2014 10:54:52 AM

legend001523 said:
Use the one that's pre applied because ig you add more it will have a opposite effect and make cooling worse, even if it's not already prw applied the one that comes with it is fine


I would not apply more over the existing, remove it first and apply the Noctua

m
0
l
September 16, 2014 10:56:50 AM

I really don't think he was going to apply over the existing.......... but I have fully ( stirred ) mixed a few over my time. some worked well.
m
0
l
September 16, 2014 11:01:27 AM

Nah the pre applied is good enough, spare the hassel, if you want 1 degree less then go for it
m
0
l
September 16, 2014 11:03:11 AM

The H100i paste is high quality and will work well.
m
0
l
!