Gigabyte GA-970A-UD3P no display on startup

zf6hellion · Sep 16, 2014

Hello, I recently tried building my first computer, following a guide for a cheap gaming pc (https://www.youtube.com/watch?v=7WQxr59KRto&).

The parts are:
GA-970A-UD3P Motherboard
1TB Seagate Barracuda ST1000DM003 3.5" SATA III Hard Drive
AMD FX-6300 3.50GHz Socket AM3+ 6-Core Processor
8GB (2x4GB) Crucial Ballistix Sport 1600MHz CL9 DDR3 Dual Channel Kit Memory
Sapphire Radeon R9 270x Dual-X Graphics card
EVGA 500W 80 Plus Power Supply

The computer starts up, all the fans spin, LEDs light up, but I get no display whatsoever. I have no idea what's wrong.

I've checked to make sure everything is securely in place within the case, and as far as I can tell, everything is. I've tried googling about for answers but I can't find a damn thing, so I'm here, and hoping anyone around here might have some suggestions.

kapitalistas · Sep 16, 2014

did your provide power cable for gpu.

zf6hellion · Sep 16, 2014

kapitalistas :

Bit of a noob, apologies, but I'm assumign you mean the PCI-E connectors. If so, they are connected to the GPU.

Outlander_04 · Sep 16, 2014

At the beginning of this forum is a thread about how to troubleshoot a build that wont boot .

Do you have both power cables plugged in to the mb?

what kind of connection from graphics card to monitor?

zf6hellion · Sep 16, 2014

Outlander_04 :

Yes.

Monitor is a VGA output cable connected to the GPU with a DVI adaptor (I've used two different ones so far with different results, one of the adaptors is filled with pins and the monitor always stays in its self test state like when its turned on but not connected to a computer, the other, with less pins causes the monitor to go straight to standby mode after it turns on if that matters any).

Outlander_04 · Sep 16, 2014

Presumably the monitor doesnt have a dvi input? Or you would just use a dvi/dvi cable?

I would try a different monitor or TV so you are only using dvi connectors all the way through

zf6hellion · Sep 17, 2014

Outlander_04 :

Yeah, just a VGA input slot.

As far as I can tell not a single monitor or TV in my house uses DVI connectors at all.

Outlander_04 · Sep 17, 2014

Then take your pc somewhere there is one .

I think you need to eliminate the adapter and cable as issues first

Search

Gigabyte GA-970A-UD3P no display on startup

zf6hellion

Reputable

kapitalistas

Honorable

zf6hellion

Reputable

Outlander_04

Titan

zf6hellion

Reputable

Outlander_04

Titan

zf6hellion

Reputable

Outlander_04

Titan

TRENDING THREADS

Latest posts

Moderators online

Share this page