Sign in with
Sign up | Sign in
Your question

Uncore frequency gulftown

Tags:
  • CPUs
Last response: in Overclocking
Share
September 16, 2014 1:14:38 PM

Hi.

I was wondering if anyone knows if my values are good.

System:
i7-970 B1
Rampage III Extreme
6x2GB Dominator GT 2KMHz 8-9-8-24
2xGTX 690 SLI
H80i

BCLK: 192
Uncore: 3072
CPU: 4427
DRAM: 1924 8-9-8-24


My problem is that I can tell on tests that I get better CPU scores with higher uncore. At 3600 uncore i get a good 400-500p extra on CPU 3DMark11 compared to 2800 uncore.
I managed to stabilize my system at 3072 uncore but can't push it any further even with QPI/DRAM at 1.43V which seems a bit high. I can lower it by a good amount if I run at 3072 uncore but don't know if that is a good enough value.
I can also increase my Vcore by maybe 0.05-0.08 more.
Vdimm is at 1.68V.

I know gulftown only needs x1.5 DRAM freq but I need to know if 3072 is a good and high value or should I be able to go higher?

If so, would Vcore and Vdimm play any roles in higher uncore frequencies?

Should I settle for the 3072 or is that low?

I appreciate any help I can get.

More about : uncore frequency gulftown

a b à CPUs
September 16, 2014 3:35:46 PM

Higher uncore will give you better memory bench results, not much in the way of overall cpu power. I would back it down and lower the qpi voltage if i were u

Uncore should be 2x ram speed not 1.5
m
0
l
September 16, 2014 10:28:54 PM

No, it's x1.5 DRAM. It's a gulftown.
m
0
l
!