New Build with Asus Sabertooth 990FX R 2.0 & FX8350 CPU

suddenswitch

Reputable
Sep 17, 2014
1
0
4,510
Hi all..
I've recently ventured in to a new PC build with the below spec and after powering up the system I am receiving a blank screen, will not post at all.

- Sabertooth 990FX R.20
- AMD FX-8350 Octo Core 4.0GHz AM3+ 16MB Cache 125W + Official AMD Cooler for this model
- Crucial 2x8GB (16GB) PC3-10600 DDR3-1333MHz CL9 240-Pin
- Seagate Barracuda 3 TB 7200 RPM
- nVidia GeForce GT 610 1GB DDR3

The DRAM LED light illuminates when powered up, I have tried MEMOK button, flashes couple of times and then the CPU light flashes also then back to just DRAM LED Static.

Have tried resetting CMOS, still no joy, power is going through board as green light is illuminated and fans etc working fine.

Video connection is via HDMI cable to Monitor, however no signal received whatsoever as of yet.
The powersupply unit was purchased from eBay, specs here

Really appreciate any advice here as i've invested quite a bit in to this already so would like to try and resolve the issue without paying out any more.. so many thanks in advance for the knowledge ;)