Sign in with
Sign up | Sign in
Your question

need help with res filling/bleeding idea

Tags:
  • Cases
  • DVD Drives
Last response: in Overclocking
Share
September 18, 2014 5:09:17 AM

i am going to have a bay res with intergrated pump, but i want to use rigid tubing, making moving the res in and out of the case to fill bleed isn't an option. The res will be located in my middle 2 slots where the dvd drives go, with the dvd drive in the bottom, i have 4. I am thinking of attaching another tube to the fillport on the res and have it coming out the top bay to outside the case to a height slightly height than the loop. I'll have a drain port in the loop at the lowest point for draining. So if the tube i described is only for filling/bleeding, could it work, as this is the only way i can think of to not have to use flexible tubing in the loog just for the res.

More about : res filling bleeding idea

September 18, 2014 5:17:40 AM

i'll be using this to connect the pipe with the compression fitting to the res- XSPC M20 to G1/4″ Fillcap Adapter and this to cap of the other end of the tube with the compression fitting that i'll be filling thru- http://www.ebay.com.au/itm/251592827429?var=55051805076...
m
0
l
!