Sign in with
Sign up | Sign in
Your question

New GPU PSU

Tags:
  • Power Supplies
  • Motherboards
Last response: in Graphics & Displays
Share
September 18, 2014 9:20:51 AM

Hi guys, i just finished getting all my parts together to upgrade my computer with new graphics card. I got a motherboard that can support EVGA ge force gt 560 ti (not sure if im saying it right) but it required newer power supply. I went and got a new power supply and installed everything after getting my hands all bloodied out and did not do any damage to motherboard imp (discharged static and so forth). Now for my new power supply is 750W and i connected the proper pins to ram, motherboard, connected the 24 pins, and 2x 6 pins to the graphics card. plugged all fans properly and thats about it. Now when i first tried to boot the computer the screen was all black it would say: No signal detected etc etc. (no beeps). Now i finally tinkered with it and redid everything step by step and i still have black screen however this time there is large beep!!!!!!11 (im happy for i know now i did not damage mother board) but i am scared that either power supply is failing or my graphics card is not working properly. Imo it is because all fans are plugged in properly. If it was power would the computer even turn on to start with? Idk. pls help me out if you can i want to make sure i do everything before i take it in to switch to new psu or get refund for graphics card etc etc. Thanks!

More about : gpu psu

a b V Motherboard
September 18, 2014 9:29:52 AM

did the cpu fan spins
m
0
l
September 18, 2014 9:33:29 AM

yes the CPU fan spins
m
0
l
Related resources
a b V Motherboard
September 18, 2014 9:40:03 AM

your may wanna connect monitordirectly to motherboard without gpu inside(have to remove it)
m
0
l
September 18, 2014 9:44:50 AM

i hoestnly tried that but what happens is that even motherboard itself does not display it mb its cause (i just noticed) the power cord sticks to the mother board. I tried removing it right now so i will try to test it again brb with results
m
0
l
September 18, 2014 9:54:34 AM

ok i tried doing it and no results the machine gives 3 beeps in intervals its like this: Beep beep beep 2 seconds beep beep beep what should i do? is it possible that power supply is failing?
m
0
l
a b V Motherboard
September 18, 2014 10:01:09 AM

its a memory failure code.may help use one stick of the time to find which is bad or replace memory at all.your wanna be sure the memory sit correctly
m
0
l
September 18, 2014 10:10:27 AM

ok i just did that xD i forot to mention that i did get new memory (kingston 2x4gb i believe ddr3) i just checked it ima redo it and get back with results :3 hold on a sec
m
0
l
!