will gigabyte h61m s2p support current cards

sampad_banerjee

Reputable
Sep 20, 2014
9
0
4,510
As mentioned below, these are the motherboard specs-

CPU
1. Support for Intel ® Core™ i7
processors/Intel ® Core™ i5
processors/ Intel® Core™ i3
processors/Intel ® Pentium®
processors/Intel ® Celeron® processors
in the LGA1155 package
2. L3 cache varies with CPU
(Some Intel ® Core™ processors require
a graphic card, please refer "CPU
support List" for more information.)
Chipset 1. Intel ® H61 Express Chipset
Memory
1. 2 x 1.5V DDR3 DIMM sockets
supporting up to 16 GB of system
memory
* Due to Windows 32-bit operating
system limitation, when more than 4
GB of physical memory is installed,
the actual memory size displayed will
be less than 4 GB.
2. Dual channel memory architecture
3. Support for DDR3
2200(OC)/1333/1066/800 MHz
memory modules
4. Support for non-ECC memory modules
(Please refer "Memory Support List"
for more information.)
Onboard Graphics
Integrated Graphics Processor:
1. 1 x D-Sub port
Audio
1. Realtek ALC887 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you
have to use an HD front panel audio
module and enable the multi-channel
audio feature through the audio driver.
LAN 1. 1 x Realtek 8111F chip (10/100/1000
Mbit)
Expansion Slots
1. 1 x PCI Express x16 slot, running at
x16
(The PCI Express x16 slot conforms to
PCI Express 3.0 standard.)
* PCIE Gen.3 is dependent on CPU and
expansion card compatibility.
2. 1 x PCI Express x1 slot
(The PCI Express x1 slot conforms to
PCI Express 2.0 standard.)
3. 2 x PCI slots
Storage Interface
Chipset:
1. 4 x SATA 3Gb/s connectors
supporting up to 4 SATA 3Gb/s
devices
USB
Chipset:
1. Up to 8 USB 2.0/1.1 ports (4 ports on
the back panel, 4 ports available
through the internal USB headers)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 4-pin ATX 12V power connector
3. 4 x SATA 3Gb/s connectors
4. 1 x CPU fan header
5. 1 x system fan header
6. 1 x front panel header
7. 1 x front panel audio header
8. 2 x USB 2.0/1.1 headers
9. 1 x Clear CMOS jumper
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x D-Sub port
4. 1 x serial port
5. 1 x parallel port
6. 4 x USB 2.0/1.1 ports
7. 1 x RJ-45 port
8. 3 x audio jacks (Line In/Line Out/
Microphone)
I/O Controller 1. iTE IT8728 chip
H/W Monitoring
1. System voltage detection
2. CPU/System temperature detection
3. CPU/System fan speed detection
4. CPU overheating warning
5. CPU/System fan fail warning
6. CPU/System fan speed control
* Whether the CPU/system fan speed
control function is supported will
depend on the CPU/system cooler you
install.
BIOS
1. 2 x 32 Mbit flash
2. Use of licensed AMI EFI BIOS
3. Support for DualBIOS™
4. PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI
2.0a
Unique Features
1. Support for @BIOS
2. Support for Q-Flash
3. Support for Xpress Recovery2
4. Support for EasyTune
* Available functions in EasyTune may
differ by motherboard model.
5. Support for ON/OFF Charge

will this mobo support cards like GT 660 or the GTX series ?