I have just finished a build for a friend`s birthday. When i first powered on the computer the power supply was on the off switch. I did not notice this and pressed the power button the PC started up for a second then turned off. I changed the power supply switch to on pressed the power button. The PC powers on but there is nothing appearing on the monitor nor is the monitor powering on when the PC is on (it stays on stand by). Did I just F-up the computer.
The case fans,CPU fan,hard drive and optical drive all power on.I have tried every monitor in my house (4) with and without the graphics card installed. I have tried RAM from my Personal Build and each Ram slot on the Motherboard.I have checked all cables.
any help is appreciated
PC Specs
i5-4590
ASRock H87M-PRO4
8gb RAM ddr3
Gigabyte R9 280
1tb Hard Drive
500W Power Supply
The case fans,CPU fan,hard drive and optical drive all power on.I have tried every monitor in my house (4) with and without the graphics card installed. I have tried RAM from my Personal Build and each Ram slot on the Motherboard.I have checked all cables.
any help is appreciated
PC Specs
i5-4590
ASRock H87M-PRO4
8gb RAM ddr3
Gigabyte R9 280
1tb Hard Drive
500W Power Supply