Sign in with
Sign up | Sign in
Your question

New PC,new problems.

Tags:
  • CPUs
  • Gigabyte
Last response: in Components
Share
September 21, 2014 10:37:38 AM

1. My FX 4130 is downclocking too much on my new ud3p mobo from gigabyte. I had that cpu on ga-78lmt-s2p and he was downclocking to 2.8 witch is nice,but now it goes down to 1.4 witch makes my PC so slow. It needed 45 mins to instal PES 2013.... How to make it stop doing that,it's so anoying?
2. I have 2x4gb 1600mhz kingstones KHX1600C9D3/4GX(1 blu and 1 red). That is 8 giga,bios says it's 8gig,My computer says it's 8 gig,but it used 4 gig. I tryed to switch slots and now it uses 6.9 gig. How to fix that so i can run my new R9 nice?
3. On last PC i had Nvidia 9800gt and it used geforce expirience to update drivers auto. I had to instal GeForce and it alone instals drivers and all needed,including PhisX. Is there anything on AMD that does that?
4. When i get in BIOS i cant see the whole screen on my 1920x1080 display. It's cuted on left and right side a bit and i cant see full names of the options.
AMD FX 4130
Ga-970A-UD3P
R9 270x Power Color PCS+
2x4 gig kingstone ram
1xsata2 HDD WD green 500gb 7200rpm
600W Sharkoon Rush power m

More about : problems

a b à CPUs
September 24, 2014 6:52:22 PM

What is your CPU temperature? Get a program like HWMonitor to measure the CPU temperature. If temperature is not the issue, then you may need to go into BIOS and turn off the energy saving CPU options, those may be fiddling with your CPU clock speed.

Also, make sure to set your Windows Power Scheme in Power Options to High Performance.

In the BIOS, you will probably need to disable C1E if that is turned on and some other possible options that may hinder your CPU's speed.
m
0
l
October 10, 2014 11:58:06 AM

I'm kinda late(sorry) but I have fixed this problem. Anyhow,thanks for your effort.
m
0
l
a b à CPUs
October 13, 2014 12:46:01 PM

No problem and good to hear.

Maybe you could post what you did to fix it in case any other users are having somewhat similar problems and could use this as a reference.
m
0
l
!