Sign in with
Sign up | Sign in
Your question

Phanteks Enthoo Pro motherboard standoff problem

Tags:
  • Enthoo
  • Cases
  • Phanteks
  • Pro
  • Motherboards
Last response: in Motherboards
Share
September 22, 2014 1:02:19 PM

Hi,

I've recently built a PC using the Enthoo Pro case using the built in standoffs from the case for mounting my ATX motherboard, however using these standoffs leads to PCH errors that are preventing me from booting around 60% of the time, which isn't exactly ideal, to put it lightly.

So I have tested the problem and it turns out it is a mounting issue involving the standoffs, so I will be buying some replacements soon to hopefully rectify this. However I wanted to ask if anyone knew the male and female threading sizes that the case uses for standoff installation, as I've never encountered a problem like this before so I dont know much about this issue. Any help would be greatly appreciated, as I cant find all the information on their site.

Thanks.

More about : phanteks enthoo pro motherboard standoff problem

a c 134 V Motherboard
September 22, 2014 1:05:45 PM

How did you test the standoffs?

Yogi
m
0
l
September 22, 2014 1:11:13 PM

Y0GI said:
How did you test the standoffs?

Yogi


I took the motherboard and other components out of the case, reconnected everything and it booted successfully every single time so it appeared to me that it is a standoff problem given that is the only real change in the scenarios, and I have also read a couple of other posts online that have had similar problems.
m
0
l
a c 1512 V Motherboard
September 22, 2014 1:15:00 PM

I'm using that case , never had an issue.

Sorry to hear this.
m
0
l
!