I recently build my own PC and used all compatible parts. I do not think this is a hardware issue because nothing is overheating and the problem seems to come and go. The problem is a weird lag that is only noticeable with my cursor. My cursor is moving very erratically and kind of uncontrollable. It will lag and then jump to where I had intended it to go. I have windows 8.1 installed via OEM system builder disc on a 120gb ssd. I want to believe that the issue is somehow related to my internet connection because it appeared to disappear after disconnecting the Ethernet but it seeemed to cause problems offline as well. The problem comes and goes and I cannot link it to any specific program. I checked my RAM and they cleared tests. I was reading that faulty motherboards caused BSOD and more major issues than lag. Possible problem could be my Sapphire R9 270 OC edition. My cpu is a fx 6300 and my motherboard is a ga990FXA UD3 Rev4.0. The power supply is a EVGA 600b. And the RAM is Corsair Vengeance two 4gb running dual channel. Any help would be fantastic as I cannot find anything online about an issue similar. The lag is unbearable and it even happens with mundane internet browsing. Also not my mouse because I switched my mouse in case it was the reason.
My computer is lagging.
- Thread starter TeddygIV
- Start date
Solution
bharathbigb
Distinguished
- Jan 7, 2013
- 354
- 0
- 18,860
Hi Sir,I am Bharath from India.I think I can help You out here.Please follow these steps.
Reasons Why Your PC is Very Slow :
1) There are Fragments That Need To Be Defragged in The Reistry and the HDD.
2) HDD are slow and will Become slower if there are Fragments.
3) Windows needs Heavy Optimization and It Has Some Problems.
4) Your PC has Unwanted Softwares and Which Uses Massive Amounts of Memory.
5) Your PC may Not Be Clean and May have Dust In it.
6) Your PC's Drivers may Be Old Which Results in Huge Performance Loss.
7) Dust is a Major Problem for Performance Drops and It Can Destroy Your PC
Fix 1 :
1) Download ASC 7.4 Pro and Driver Booster 1.4 Pro.
2) Open ASC 7.4 Installer and Install It and Make it into PRO.
3) Open Driver Booster and Install It and Make it PRO.
4) Run Deep Clean In ASC 7 PRO and while Scanning Uncheck 'Repair Automatically'
5) In ASC 7 PRO,Select Go To ToolBox,Open Startup Manager and Uncheck All The Startup Items.
6) Activate Turbo Boost in ASC 7 PRO
7) Open Driver Booster and Scan,Download and Install the Outdated Drivers
Fix 2 :
1) Open Your PC's Case
2) Disconnect All of Your Storage (HDD or SSD) and DVD Writer's Cables from Both The HDD's Socket and The Motherboard's Socket and Keep The Cables Separatley (Sata or IDE It Doesn't Matter !!).
3) Remove The Storage (HDD or SSD) and The DVD Writer From Your PC and Clean The Its Body and Its Socket .
4) Clean The Storage's And The DVD Writer's Body And The Socket.
5) Also Clean The All The HDD and DVD writer Brackets.
6) Clean The Whole MotherBoard With The Brush or With The Airblower.
7) Clean The Cables with The Brush (DO NOT CLEAN THE PARTS YOU REMOVED WITH AIRBLOWER OR VACCUM CLEANER BUT YOU CAN CLEAN THE MOTHERBOARD).
8) Reconnect all the Parts you removed.
9) Disconnect the Cables at the Back Of your PC and Clean The Sockets of Both With Any Thing (Brush,Air Blower Or Vaccum Cleaner).
10) Clean All Of (Front,Side Or The Back) The Fans with Anything On You PC's Case except The CPU Fan.
11) After Doing All Of These Steps, Remove the Side Panel of Your PC and Let Your PC sit for a While (10-30 Minutes) in an Open,a Well Ventilated Room and a Cool Room.
This Will Give you a 50% Better Performance,a Cooler and a Quiter PC.
But If You Want a Bit More Performance,Just Follow the Optional Fixes.This May Gonna Cost You.
This Step is even More Harder Than the Fix 2 so I Recommend To DO THIS ONLY IF YOU KNOW TO ASSEMBLE A COMPUTER.
Other Optional Fixes
1) Remove The Everything From The Case (Mobo,PSU,HDD.etc) and Clean The PC With a Dry Cloth and With the Vaccum Cleaner and The Blower.
2) If Your PC's Case Has an Air Filter(A Net In Front Of The Fans) Any Where,Clean It With The Brush First and With the Vaccum Cleaner and The Blower.
3) Clean The PSU's Fan From The Outside.
4) Re-Assemble the Parts with The Case and Do Some Better Cable Management !!.
Thats It !!
I am Sure This Works As I Have Tried This In My Old PC.Now I Have an SSD so There Isn't any Performance Issues.
Thank You For Spending Your Time.
Please inform me the Result
All The Best and Good Luck.
If my suggetions fix your Problems,Please don't forget to make mine as the Best Answer
Thank you
Reasons Why Your PC is Very Slow :
1) There are Fragments That Need To Be Defragged in The Reistry and the HDD.
2) HDD are slow and will Become slower if there are Fragments.
3) Windows needs Heavy Optimization and It Has Some Problems.
4) Your PC has Unwanted Softwares and Which Uses Massive Amounts of Memory.
5) Your PC may Not Be Clean and May have Dust In it.
6) Your PC's Drivers may Be Old Which Results in Huge Performance Loss.
7) Dust is a Major Problem for Performance Drops and It Can Destroy Your PC
Fix 1 :
1) Download ASC 7.4 Pro and Driver Booster 1.4 Pro.
2) Open ASC 7.4 Installer and Install It and Make it into PRO.
3) Open Driver Booster and Install It and Make it PRO.
4) Run Deep Clean In ASC 7 PRO and while Scanning Uncheck 'Repair Automatically'
5) In ASC 7 PRO,Select Go To ToolBox,Open Startup Manager and Uncheck All The Startup Items.
6) Activate Turbo Boost in ASC 7 PRO
7) Open Driver Booster and Scan,Download and Install the Outdated Drivers
Fix 2 :
1) Open Your PC's Case
2) Disconnect All of Your Storage (HDD or SSD) and DVD Writer's Cables from Both The HDD's Socket and The Motherboard's Socket and Keep The Cables Separatley (Sata or IDE It Doesn't Matter !!).
3) Remove The Storage (HDD or SSD) and The DVD Writer From Your PC and Clean The Its Body and Its Socket .
4) Clean The Storage's And The DVD Writer's Body And The Socket.
5) Also Clean The All The HDD and DVD writer Brackets.
6) Clean The Whole MotherBoard With The Brush or With The Airblower.
7) Clean The Cables with The Brush (DO NOT CLEAN THE PARTS YOU REMOVED WITH AIRBLOWER OR VACCUM CLEANER BUT YOU CAN CLEAN THE MOTHERBOARD).
8) Reconnect all the Parts you removed.
9) Disconnect the Cables at the Back Of your PC and Clean The Sockets of Both With Any Thing (Brush,Air Blower Or Vaccum Cleaner).
10) Clean All Of (Front,Side Or The Back) The Fans with Anything On You PC's Case except The CPU Fan.
11) After Doing All Of These Steps, Remove the Side Panel of Your PC and Let Your PC sit for a While (10-30 Minutes) in an Open,a Well Ventilated Room and a Cool Room.
This Will Give you a 50% Better Performance,a Cooler and a Quiter PC.
But If You Want a Bit More Performance,Just Follow the Optional Fixes.This May Gonna Cost You.
This Step is even More Harder Than the Fix 2 so I Recommend To DO THIS ONLY IF YOU KNOW TO ASSEMBLE A COMPUTER.
Other Optional Fixes
1) Remove The Everything From The Case (Mobo,PSU,HDD.etc) and Clean The PC With a Dry Cloth and With the Vaccum Cleaner and The Blower.
2) If Your PC's Case Has an Air Filter(A Net In Front Of The Fans) Any Where,Clean It With The Brush First and With the Vaccum Cleaner and The Blower.
3) Clean The PSU's Fan From The Outside.
4) Re-Assemble the Parts with The Case and Do Some Better Cable Management !!.
Thats It !!
I am Sure This Works As I Have Tried This In My Old PC.Now I Have an SSD so There Isn't any Performance Issues.
Thank You For Spending Your Time.
Please inform me the Result
All The Best and Good Luck.
If my suggetions fix your Problems,Please don't forget to make mine as the Best Answer
Thank you
TRENDING THREADS
-
-
Question Can´t open BIOS because no keyboard input is received.
- Started by Blatscher
- Replies: 11
-
-
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 35
-
-
Question New pc build r9 7900x3d rtx 4080 super no post only ram rgb turns on- Started by Harvey Durward
- Replies: 4
Facebook
Twitter
Instagram