Someone please help me; Front panel connectors to mobo

bigboss619 · Sep 26, 2014

I recently bought a new case to upgrade my prebuilt acer I bought, to give it a little more room for things like graphics cards and more airflow. The cases front panel power connectors are labeled but the pins on the mobo are not and there is no manual being as it is a generic acer mobo.
Here are the connectors:https://imageshack.com/i/ipyXm4pOj
Here are the pins: https://imageshack.com/i/ipZ063Wrj
Can someone please tell me which pins to put them in? This is the only thing stopping me from being able to use my PC and I would like to find out if my effort of switching over the parts was worth it or not.

turkey3_scratch · Sep 26, 2014

Look at my post below

swifty_morgan · Sep 26, 2014

did it occur to you to watch ( make a map as to where the wires went ) what you were doing when you disconnected the wires in the first place?

make and model of original pc?

turkey3_scratch · Sep 26, 2014

Look at my post below

turkey3_scratch · Sep 26, 2014

They go in JFP1 search it on google images. JFP1 is a 9-pin port on the motherboard for all of these plugs you have in the image.

bigboss619 · Sep 26, 2014

turkey3_scratch :

Either the JFP1 diagrams im seeing are wrong, or it's just not working

bigboss619 · Sep 26, 2014

swifty_morgan :

Acer Aspire AX1470

turkey3_scratch · Sep 26, 2014

bigboss619 :

When I made my first (and only) build, the reason it would not boot was because these plugs were not in the correct spot in JFP1. Make sure they are exactly as shown in the diagrams.

bigboss619 · Sep 26, 2014

turkey3_scratch :

Link me to a diagram you feel is accurate, because I'm putting the pins in exactly as the ones im looking at and its not working; Knowing my luck I probably just fried the mobo while switching cases

turkey3_scratch · Sep 26, 2014

bigboss619 :

turkey3_scratch :

Link me to a diagram you feel is accurate, because I'm putting the pins in exactly as the ones im looking at and its not working; Knowing my luck I probably just fried the mobo while switching cases

It's probably something else. Do your fans turn on at all when you push the power button? Is your CPU power cable plugged in?

bigboss619 · Sep 26, 2014

turkey3_scratch :

bigboss619 :

It's probably something else. Do your fans turn on at all when you push the power button? Is your CPU power cable plugged in?

Nevermind, I realized the cord wasn't plugged into the outlet all the way. The JFP1 otherwise was the issue and solved it, thank you so much for the help. I will know that for future reference now

i7Baby · Sep 26, 2014

Its a FM1 mobo per http://www.manualslib.com/manual/232903/Acer-Aspire-X1470.html?page=9#manual with AMD A75 FCH or A55 FC chipsets.

You'd have to ask Acer for more detail. The joys of a pre-built. They aren't made to upgrade or repair.

swifty_morgan · Sep 26, 2014

http://www.manualslib.com/manual/232903/Acer-Aspire-X1470.html

page7 and page 38............ 38 will show the front panel connector and where they go on the front of the case. best I can do. you'll have to look at what you had, what you have and try to do something with it. good luck.

Search

Someone please help me; Front panel connectors to mobo

bigboss619

Reputable

turkey3_scratch

turkey3_scratch

Expert

swifty_morgan

Illustrious

turkey3_scratch

Expert

turkey3_scratch

Expert

bigboss619

Reputable

bigboss619

Reputable

turkey3_scratch

Expert

bigboss619

Reputable

turkey3_scratch

Expert

bigboss619

Reputable

i7Baby

Titan

swifty_morgan

Illustrious

TRENDING THREADS

Latest posts

Moderators online

Share this page